EICR - 2 boards, 1 with an off peak split and one with regular supply | Page 2 | on ElectriciansForums

Discuss EICR - 2 boards, 1 with an off peak split and one with regular supply in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

I believe for someone to carry out EICRs they must have an expansive knowledge of electrical installation methods, past and present. A thorough understanding of current requirements and how these may or may not affect existing installations. The ability to produce a factual Report with concise grammar. Most of this cannot be achieved in a classroom.
 
I believe for someone to carry out EICRs they must have an expansive knowledge of electrical installation methods, past and present. A thorough understanding of current requirements and how these may or may not affect existing installations. The ability to produce a factual Report with concise grammar. Most of this cannot be achieved in a classroom.
Well, would that not mean that only electricians who lived through the 70s till present day could do an eicr?
I do understand broadly what you mean,and i agree that this qualities you mention would be very valuable, but it doesnt seem like a practical approach.
At the end of the day, people are required to have their properties tested etc so there has to be a mechanism for providing people the knowledge to have this done?
 
Well, would that not mean that only electricians who lived through the 70s till present day could do an eicr?
I do understand broadly what you mean,and i agree that this qualities you mention would be very valuable, but it doesnt seem like a practical approach.
At the end of the day, people are required to have their properties tested etc so there has to be a mechanism for providing people the knowledge to have this done?
I partly agree with what you say, but you need a little knowledge.
And I truly mean no disrespect with this next bit.
I don't think you have that based on what your asking.
You have to start somewhere, I know. But for now get a bit of experience. Avoid EICR's and do them after that experience grows a bit and do the 2395 or what ever the equivalent is now.
 
I think Spin is saying that two CUs from one single supply is classed as two installations.

A great attempt at trolling but not good enough to catch me out.
You haven't been drinking enough tonight have you? Must try harder Essex!!!
 
I think Spin is saying that two CUs from one single supply is classed as two installations.

A great attempt at trolling but not good enough to catch me out.
3 Phase supply into the basement of a building.
Ground floor shop, first floor flat, second floor flat.
One supply, how many installations?

Oh yes, and of course there’s also the fact that a single installation can have more than one supply
 
Last edited by a moderator:
The origin of an installation is the consumer connection point at the meter.
2 meters, 2 installations.
1 meter with 2 connection points, 2 installations.
so does that mean that this flat actually has 3 installation what with the board that has one side regular supply, other side off peak, and then another board regular supply?
 

Reply to EICR - 2 boards, 1 with an off peak split and one with regular supply in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
291
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
800
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
831

Similar threads

Here the BPG#4 is useful, it is not a statutory document at all, but it provides good guidance as to what can reasonably considered as C1/C2/C3...
Replies
11
Views
1K
In the 80's I was taught that with PME earthing arrangements we used 16mm for the main earthing conductor, some went a bit crazy and were bonding...
Replies
11
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top