Eicr code - db is dirty

[Tim]

Hi guys,

Im doing an eicr on an events building, the db is in the main kitchen, however dirt and grime havegot into the db.

Would you code it?

Im thinking c3 as there is no sign of danger but improvements could be made. Or am i being too picky.

The cause of the grime getting in is the fact that the door hinge is broken, this has already been noted.

The pic is of the worst part

Hope your all having fun on this winters day

Tim

 

[sparkymalarky]

A bit pedantic but, you could include this note in the original recommendation and record it all as one. i.e evidence of foreign bodies and grime within distribution board causing build up of dirt etc at MCB's within or something like that. C3. Check the MCB's for tightness etc and make sure all connections are secure.

 

[Dan23584]

If you have already noted the door missing I would probably note the grime issue with that, rather than a separate note. That way it falls in with the same code as the missing door.

 

[jimmymac]

Just wipe it down with a wet cloth........just kidding:wink5:

I'd just flag it up as a C3 on the same note as the door being broken

- - - Updated - - -

If you have already noted the door missing I would probably note the grime issue with that, rather than a separate note. That way it falls in with the same code as the missing door.

you beat me to it

 

[jimmymac]

A bit pedantic but, you could include this note in the original recommendation and record it all as one. i.e evidence of forgeign bodies and grime within distribution board causing build up of dirt etc at MCB's within or something like that. C3. Check the MCB's for tightness etc and make sure all connections are secure.

you beat us both to it!

 

[Dan23584]

Just wipe it down with a wet cloth........just kidding:wink5:

I'd just flag it up as a C3 on the same note as the door being broken

- - - Updated - - -


you beat me to it

thats what wet wipes are for mate!

 

[Tim]

Ill agree with the concensus that im being pedantic, ill include it in the code for the broken door hinge.

Cheers guys,
Tim

On a side note, look what i found above the sink. Code 1 i think. (I will fix this on site obviously)



And no dissing the voltage detector, they have their uses, however limited.

 

[dan86]

same as others.note with the broken door.
also looks pretty untidy in there!

 

[sparkymalarky]

Make sure you make the relevant people aware about this C1 and ask if they would like for you to make it safe there and then. I agree they are handy. Its Voltage screwdriver phase testers whatever you want to call them that I hate.

May as well shake hands with your nearest 11kV Transformer.

 

[Brightspark2]

Make sure it's actually live, dont just trust the volt stick...

 

[Tim]

I did check, and it was definatly live, i have now disconnected it from the dp isolator.

Volt sticks are good for indication, but i wouldnt bet my life on them

Cheers,
Tim

 

[Fast&Rough]

Pressure washer works wonders in a live board

 

[Guitarist]

The fact that the MCB's are dirty on the outside would make me wonder how much gunge is on the inside, and potentially stop them working correctly.

 

[partypest]

I love my volt stick, particularly useful with appliances for seeing if the fuse is blown. They're a quick, non contact method to giving you a clue!

 

[dan86]

I love my volt stick, particularly useful with appliances for seeing if the fuse is blown. They're a quick, non contact method to giving you a clue!

I personally just do a continuity check on the fuse! don't have a volt stick. never have!