EICR prices - 3 bed semi or per certificate? | on ElectriciansForums

Discuss EICR prices - 3 bed semi or per certificate? in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Chris

-
Joined
Aug 22, 2018
Messages
84
Reaction score
33
Location
Merseyside
I was asked if I can test a domestic property in Liverpool yesterday, I said yes i can and told them I charge £120 for an EICR. They then replied
"£100 sounds better"
I replied saying no I charge £120 for a domestic EICR (Which i think is pretty reasonable?)
They did not reply!

Out of curiosity how much do you charge for a domestic EICR and what area are you from?
I Feel like £100 is too cheap for a proper inspection and test?
and do any of you negotiate on price at all?
I set a price and dont move from it as i think if i could do it any cheaper (without doing myself over) then I would? If i set a price and then lower it was i not overcharging in the first place?

Curious to hear other opinions!
 
Better off setting your price per circuit and don’t budge, that’s the price take it or leave don’t race to the bottom cos everyone loses :)
What is your price per circuit if you dont mind me asking?
[automerge]1567009384[/automerge]
Depends on the size of the property, but £120 is too cheap unless it is a very small flat/bedsit.

See most people ive spoken too charge around the 120 mark so ive always thought its pretty standard, i usually spend around 3 hours in the property testing and about an hour writing up the cert. Charged at £30ph. What is your pricing process?
 
Napit s suggestion for eicrs seems a standard that can be applied in most instances
They recommend 40 mins per circuit and 40 mins per distribution board

So a typical domestic with one cons unit and 6 circuits would be around five hours with the paperwork added,multiply this by your hourly rate
 
@Chris, I only do domestic and only as an add on to my existing business and rarely do an eicr so don’t really have to be competitive, I charge £30 a circuit upto 6 circuits, anymore than that and I’d charge for the day......but as I say if I don’t get it I’m not fussed :)......and with the advent of the drive by £60 eicr I can’t see me doing many more as I want no part of that game.....I’d rather sleep easy at night than put my name to one of them
 
I estimate how long it will take, and cost it based on £36 or £40 per hour. But it is rare that I'd only need 3 hours, more like 5 hours for 3-bed semi, and longer for a larger property.

Plus I'm sufficiently busy that I'm not worried if I don't get the work. If someone tells me it is expensive, I usually explain they can likely get it done cheaper, possibly with reduced testing (which might be what they are looking for, if it is just to be able to say one has been done).
 
It’s shame that it’s gonna take another person dying before anyone clamps down on the drive bys.....

When you say "another person" who is the first person by the way ?
If there was a first person I would suggest a second will have no effect on the PIR industry at all

Not enough people get killed by electricity therefore any action to regulate is a cost that can not be justified by the regulators

The scam of inspections by mainly inexperienced persons for rogue companies will continue unabated whilst economics is the only driving force
 
I was asked if I can test a domestic property in Liverpool yesterday, I said yes i can and told them I charge £120 for an EICR. They then replied
"£100 sounds better"
I replied saying no I charge £120 for a domestic EICR (Which i think is pretty reasonable?)
They did not reply!

Out of curiosity how much do you charge for a domestic EICR and what area are you from?
I Feel like £100 is too cheap for a proper inspection and test?
and do any of you negotiate on price at all?
I set a price and dont move from it as i think if i could do it any cheaper (without doing myself over) then I would? If i set a price and then lower it was i not overcharging in the first place?

Curious to hear other opinions!
Too cheap more likely £250 plus a bit say £300
 

Reply to EICR prices - 3 bed semi or per certificate? in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
433
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Echo above, as someone who's probably similarly inexperienced I have set myself up a per point spreadsheet and whack it all in there. This has...
Replies
9
Views
592
Thanks mate for the advice, this is just what I was looking for. I think I’ll have to put some thought into the domestic route due to the NVQ and...
Replies
2
Views
376

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top