Electrical engineering. HND vs Degree | Page 2 | on ElectriciansForums

Discuss Electrical engineering. HND vs Degree in the Electrical Engineering Chat area at ElectriciansForums.net

Go for the hnd, then when completed if you wish to carry on learning, you can enroll onto a degree starting a few years ahead. Good luck
 
There is ample opportunity these days to work your way through the qualifications. Go for the HND, then on completion you can swing across to a degree. COLU at teeside offer a HND distance learning, with a load of different modules you can take.

Or find somewhere that offers a degree part time. COLU at teeside offer HND distance learning, with a load of different modules you can take. Its a bit pricy since the Tories doubled tuition fees a few years back (ÂŁ450 per module last time I looked). If HV is something you fancy, their HV operations courses actually count as a credit to it. It wil set you back about ÂŁ1500 for the HV though.

If you have an issue with maths, I would highly recommend Engineering Mathematics, by K.A. Stroud. Its what I used through my degree, and will stand you in good stead right up to Honours level. I actually completed the whole book cover to cover, as well as "Further Engineering Mathematics". Well I did enjoy Maths.
 
After the HND you can top up to a Beng on a shorter deg. It's what I did.

Also, gives you a solid background on the math involved. As the math gets pretty solid at degree level. Even the HND math is higher than the modern A level math.
 
After the HND you can top up to a Beng on a shorter deg. It's what I did.

Also, gives you a solid background on the math involved. As the math gets pretty solid at degree level. Even the HND math is higher than the modern A level math.

Thanks Rob. Think that's what I'll do
 
After I came out of my apprenticeship I went down the route of; c course, onc, hnc and then went onto a degree. I found that a very successful strategy as each year my abilities grew steadily and wasn't overwhelmed by any of the subjects
Exactly the route I went. I did my HND over several years as block release whilst I was an apprentice then went on to complete a degree a couple of years later.
 
only problem i see is the higher up you go, degree etc. , you get shovelled into desk jobs. that happened to me with HND. after 6 months sitting at a desk, i quit and went in at the deep end, having little experience on the tools, but with th right mindset to learn, bei basically hands-on. rebuilt motorbikes, done some electrical experiments whilst in teens, all helped.
 
only problem i see is the higher up you go, degree etc. , you get shovelled into desk jobs. that happened to me with HND. after 6 months sitting at a desk, i quit and went in at the deep end, having little experience on the tools, but with th right mindset to learn, bei basically hands-on. rebuilt motorbikes, done some electrical experiments whilst in teens, all helped.

Yeh I do fear that a little bit tbh. However, I think long term I am better to build my quals up now. I can still keep my hand in on the tools with side jobs etc. I do that now anyway
 
only problem i see is the higher up you go, degree etc. , you get shovelled into desk jobs. that happened to me with HND. after 6 months sitting at a desk, i quit and went in at the deep end, having little experience on the tools, but with th right mindset to learn, bei basically hands-on. rebuilt motorbikes, done some electrical experiments whilst in teens, all helped.

I have quite a similar experience to you.
Got my degree (mid 30s), and after deluding myself for about 18-24 months I could get a job as an Engineer, I (I think anyway) fell on my feet and got a job as an Instrument Tech, best work ever, did have loads of previous practical skills. In later jobs I had to get my basic Electrical quals in the bag, 16th, 2391, 2400. :)
 
Hi.

I was like you a couple of years ago.

I got 100% at almost every C&G exam when I did 2365, so I decided to keep studying, as like you I like learning.

For your case, I wholeheartedly recommend having a look at doing a degree with Open University. It’s tailored to mature students, people who are already in the industry that want to get the corresponding degree, etc. It also starts at the very beginning, so it’s perfect if you’ve been out of school for a while/didn’t get A-levels/you’re not quite sure whether or not you can hack it.

It’s also designed for part time students, so you can keep working at the same time, as the workload is very manageable and they are quite flexible. It takes a bit longer than with a brick and mortar uni, but the degree is the same. It does require discipline, though. Once a year, you attend a residential week where they concentrate all the practical labs you’d do over the course of the year

I did my first year with open uni, and then moved to a brick and mortar uni because they offered a degree (Master) in the exact discipline I wanted (naval engineering), which Open didn’t offer.

It’s also much cheaper than other degrees.

Let me know if you need any more information, happy to help. Even though I have moved to a brick and mortar uni, I still keep in touch with the guys I did the first year.

Tbh I'm not quite sure. What I do know is I really like to learn, like a challenge and enjoy engineering generally.
 
Hi Guys,

Interesting read. Well I am 46 qualified electrician and now doing a desk job managing facilities companies.
Looking for a new challenge and doing HND electrical engineering.
Question is - What type of work would I pick up and what sort of salary would you expect. On guy told me he gets 60k as an engineer??

Thanks
 

Reply to Electrical engineering. HND vs Degree in the Electrical Engineering Chat area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
267
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
762
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
752

Similar threads

Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
Replies
8
Views
843

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top