electrical window wiring/control

[J.C.E]

Doing a rewire of a kitchen where the exisiting electric windows are remaining

The previous controller/connections was cut out and thrown away with the builders demo!

Never really had to connect up a electric window before- I have extended the 2x 2core cables the go to the 2 windows- with a 5core into a cupboard that I can get power from via a 13a spur to fuse down...

But what gear do I need and what are the connections to power these windows again and control them
The client is happy with a standard switch- or the lighting is controlled by Lutron RA2- so if I could control it by this too that would be a nice touch

see photos of cables coming from 2x windows attached..

 

[westward10]

You need something like this however it is not clear what switch mode it is. You could try emailing them.

Wired Wall Switch

Wired Wall Switch for both 100-240V AC and 24V DC electric window opener and automatic window actuator Works for both 100-240V AC Electric Window Opener (HT300AC) and 24V DC Electric Window Opener (HT300DC)

hceur.com

 

[freddo]

It's just a 2 pole 2 throw centre off switch, the same as all the others posted in this thread.