Electrician level 3 design projects | on ElectriciansForums

Discuss Electrician level 3 design projects in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Special location(s) lots to think about in terms of protecting people and especially Signage for any equipment used purely to power Cleaning equipment near the pool areas. Load ? Size ? Emergency lighting ? Is this the Rooms too?
 
Upvote 0
Special location(s) lots to think about in terms of protecting people and especially Signage for any equipment used purely to power Cleaning equipment near the pool areas. Load ? Size ? Emergency lighting ? Is this the Rooms too?
 

Attachments

  • [ElectriciansForums.net] Electrician level 3 design projects
    Screenshot_20231113_153243_OneDrive.jpg
    236.1 KB · Views: 123
  • [ElectriciansForums.net] Electrician level 3 design projects
    Screenshot_20231113_153239_OneDrive.jpg
    214.3 KB · Views: 101
  • [ElectriciansForums.net] Electrician level 3 design projects
    Screenshot_20231113_153232_OneDrive.jpg
    217.6 KB · Views: 115
Upvote 0
Probably needs someone with more experience than me but I did get involved in a renovation project for a Hotel about 7 years ago. Here's some thoughts. looks like there's already a bit of design going on in the Summer house. Obviously requires at least one three phase board with various sub mains off it single and three phase. One to supply the kitchen

Each bedroom should perhaps have a single phase feed to a small Enclosure for at least 2 or 3 RCBOs supplying sockets, lighting and ventilation/aircon. Maybe 6mm~16mm depending on what's going in there? 5 amp lighting either side of the beds for a high spec hotel, Wall TV with a Cat6 supply to it. Hairdryer and mirrored light outside the bathroom. Shave point / toothbrush charger inside.

Emergency lighting in all corridors - probably fully maintained. PIR lighting if corridors are long to save power.

Solar panels on the roof to safe the client money and to help lower costs.

Three phase to kitchen equipment as the venue could be used for weddings and other events so plenty of power maybe required.

Power to a plant room to supply boilers and water heating equipment

Pool will require some power for cleaning maybe a 16A RCD socket somewhere and this needs to be fully signed up so some Herbert teaching aqua gym lessons doesn't plug a stereo into it and kill himself (there's a story somewhere about it).

External lighting to carpark areas, outside security and hospitality lighting and maybe patio heating under cover.

Power to Sauna for the mood lighting and Heater unit plunge pool have to look into the special locations. the sauna surprising hasn't got many Regs
 
Upvote 0
Probably needs someone with more experience than me but I did get involved in a renovation project for a Hotel about 7 years ago. Here's some thoughts. looks like there's already a bit of design going on in the Summer house. Obviously requires at least one three phase board with various sub mains off it single and three phase. One to supply the kitchen

Each bedroom should perhaps have a single phase feed to a small Enclosure for at least 2 or 3 RCBOs supplying sockets, lighting and ventilation/aircon. Maybe 6mm~16mm depending on what's going in there? 5 amp lighting either side of the beds for a high spec hotel, Wall TV with a Cat6 supply to it. Hairdryer and mirrored light outside the bathroom. Shave point / toothbrush charger inside.

Emergency lighting in all corridors - probably fully maintained. PIR lighting if corridors are long to save power.

Solar panels on the roof to safe the client money and to help lower costs.

Three phase to kitchen equipment as the venue could be used for weddings and other events so plenty of power maybe required.

Power to a plant room to supply boilers and water heating equipment

Pool will require some power for cleaning maybe a 16A RCD socket somewhere and this needs to be fully signed up so some Herbert teaching aqua gym lessons doesn't plug a stereo into it and kill himself (there's a story somewhere about it).

External lighting to carpark areas, outside security and hospitality lighting and maybe patio heating under cover.

Power to Sauna for the mood lighting and Heater unit plunge pool have to look into the special locations. the sauna surprising hasn't got many Regs
I really do appreciate all your help I really do. Taking the time to write all that out thank you very much. This might sound strange Let me know if I can message you on other platforms like Facebook or anyway you feel comfortable so I can ask more questions if I need if that's ok with you where we are talking now is so bad the website crashes every five minutes and it takes me 30 to 40 minutes just to reply back to your message its extremely frustrating But if that's all the help you can give. I appreciate all of it thank you
 
Upvote 0
Probably needs someone with more experience than me but I did get involved in a renovation project for a Hotel about 7 years ago. Here's some thoughts. looks like there's already a bit of design going on in the Summer house. Obviously requires at least one three phase board with various sub mains off it single and three phase. One to supply the kitchen

Each bedroom should perhaps have a single phase feed to a small Enclosure for at least 2 or 3 RCBOs supplying sockets, lighting and ventilation/aircon. Maybe 6mm~16mm depending on what's going in there? 5 amp lighting either side of the beds for a high spec hotel, Wall TV with a Cat6 supply to it. Hairdryer and mirrored light outside the bathroom. Shave point / toothbrush charger inside.

Emergency lighting in all corridors - probably fully maintained. PIR lighting if corridors are long to save power.

Solar panels on the roof to safe the client money and to help lower costs.

Three phase to kitchen equipment as the venue could be used for weddings and other events so plenty of power maybe required.

Power to a plant room to supply boilers and water heating equipment

Pool will require some power for cleaning maybe a 16A RCD socket somewhere and this needs to be fully signed up so some Herbert teaching aqua gym lessons doesn't plug a stereo into it and kill himself (there's a story somewhere about it).

External lighting to carpark areas, outside security and hospitality lighting and maybe patio heating under cover.

Power to Sauna for the mood lighting and Heater unit plunge pool have to look into the special locations. the sauna surprising hasn't got many Regs
 

Attachments

  • [ElectriciansForums.net] Electrician level 3 design projects
    Screenshot_20231112_154438_Classroom.jpg
    141.1 KB · Views: 116
  • [ElectriciansForums.net] Electrician level 3 design projects
    Screenshot_20231112_154432_Classroom.jpg
    183.9 KB · Views: 106
  • [ElectriciansForums.net] Electrician level 3 design projects
    Screenshot_20231112_154426_Classroom.jpg
    208.3 KB · Views: 116
Upvote 0
Hi can anyone assist via email i am doing this at the moment, about half way through but struggling with some calculations. any help would be amazing
 

Attachments

  • [ElectriciansForums.net] Electrician level 3 design projects
    IMG_5137.jpeg
    453 KB · Views: 45
Upvote 0
Hey guys this is my first post on this site. Just got my design project It's a swimming pool hotel and cafe. I haven't got a clue where to begin if anyone could give me any advice please do. Thanks
hi Barry, im in the exact same position you was last year unfortunately. if there is any way you can help me out I will appreciate it a lot I can give you my contacts and we can sort something out. thanks
 
Upvote 0
Hey guys this is my first post on this site. Just got my design project It's a swimming pool hotel and cafe. I haven't got a clue where to begin if anyone could give me any advice please do. Thanks
First question barry is have you done a course?
if so then surely you should have some idea.

I am torn here, one part of me wants to help but then would I be helping you really? if you really have no clue as you say then really you need more training, also I would love to help and nearly did, but again I care about you and need you to learn for yourself, telling you answers will not help you long term. Good luck Barry, please let us all know here if you are on a course or not.
 
Upvote 0

Reply to Electrician level 3 design projects in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
939
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
If you are using Zdb you do not add on Ze as that is already incorporated into Zdb.
Replies
25
Views
2K
  • Question
Anybody who finds the best electrical training videos please add them to the forum in the training category here please. Copy and paste the URL to...
Replies
3
Views
567

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Courses

This is the main Electrical Courses at ElectriciansForums.net. Find local recommended electricians courses. Avoid training "company" scams. Always go view the training centre before booking any electrical courses.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top