Estimate of cost and what can and can't a none qualified person do? | Page 2 | on ElectriciansForums

Discuss Estimate of cost and what can and can't a none qualified person do? in the Commercial Electrical Advice area at ElectriciansForums.net

I thought at first when I saw the 18th on-site guide with the regs book it was the IET's never knew it was the NICEIC's version. They will be writing their own copy of BS7671 next.
They think they make the rules anyway
 
This is a difficult one to answer really. I wouldn't advise anyone who isn't experienced and qualified to carry out electrical work, so suggesting that friends who may have done some work in their own houses but have no real experience would ring alarm bells to me. The other obvious option would be to look for a registered company to do the work, but I see so many poor installations by firms that I know it wouldn’t guarantee a good or even safe job.


Maybe try contacting some companies and asking for some freebie work, you may find some are of a charitable nature and will help out for good will, maybe yo could offer some free advertising / promotion on your behalf as payment depending on what sort of charity you are?
 
Thanks for all the info everyone.
I thought it would be overly sided towards getting a pro in but looks like there is room to do stuff within reason.

Ideally yes we would have someone come in and do it all and that is the plan.
Is it fair to say, main circuit stuff should be done by professionals, while something like adding a few lights, changing fixtures over to LED should be fine as long as we know what we are doing?

Personally, I have been working with wiring homes, adding circuits to CUs and replacing them, putting power into workshops at bottom of garden since I was 13. Probably not legal looking at the documents some have listed...

Again thanks for the info. Much help.
 
Is it fair to say, main circuit stuff should be done by professionals, while something like adding a few lights, changing fixtures over to LED should be fine as long as we know what we are doing?

sounds fair to me.
 
We always have the ' If you're not a qualified spark charging an arm an a leg your house will burn down/explode/fly into space ' replies, and 'it must be tested' which of course is a good udea. However, I have been to four instances where there has been a fire, the cause was electrical, the wiring was installed and tested by a registered electrician, and certificates issued. In each case the insurance didn't pay up as there were obvious faults in the wiring. I also went to many with no such problem. My point is that the certificate isn't the only thing you need.
 
Thanks for all the info everyone.
I thought it would be overly sided towards getting a pro in but looks like there is room to do stuff within reason.

Ideally yes we would have someone come in and do it all and that is the plan.
Is it fair to say, main circuit stuff should be done by professionals, while something like adding a few lights, changing fixtures over to LED should be fine as long as we know what we are doing?

Personally, I have been working with wiring homes, adding circuits to CUs and replacing them, putting power into workshops at bottom of garden since I was 13. Probably not legal looking at the documents some have listed...

Again thanks for the info. Much help.
Is public liability Insurance required?
 

Reply to Estimate of cost and what can and can't a none qualified person do? in the Commercial Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
265
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
756
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
743

Similar threads

Thank you for your response. I really appreciate it.
Replies
13
Views
738
  • Question
much more information required. Is the supply to the first building a DNO supply or a sub main cable from another building ? if it is a sub main...
Replies
5
Views
945

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top