European hogklassic cooktop

[Matthewsfg]

Any European appliance specialist sparkie here

Any European appliance specialist sparkie here ?

I replaced Chinese Omega cooktop with an IKEA European brand Hogklassic.

It does not turn on, could anyone please help find what did I do wrong?

Or is it me not able to turn it on ??

Thanks everyone

 

[westward10]

It appears to be connected correctly albeit to a dire standard. Is everything switched on at your consumer unit?

 

[Matthewsfg]

It appears to be connected correctly albeit to a dire standard. Is everything switched on at your consumer unit?

Thank you for your prompt response.

Yes connected. Initially tried to turn on without any pot, later placed a small tea pot . Nothing happened.

But regardless if I place the pot or not it should turn on I atleast ?

 

[westward10]

Have you tripped anything at your consumer unit?

 

[Matthewsfg]

Have you tripped anything at your consumer unit?

No, turned off the breaker and turned it on after connection to stove.

 

[westward10]

Has an RCD tripped?

 

[Matthewsfg]

Has an RCD tripped?

No

 

[Jock from the north]

Any European appliance specialist sparkie here

Any European appliance specialist sparkie here ?

I replaced Chinese Omega cooktop with an IKEA European brand Hogklassic.

It does not turn on, could anyone please help find what did I do wrong?

Or is it me not able to turn it on ??

Thanks everyone



View attachment 119871

Why isn't it clamped to cable clamp

 

[Matthewsfg]

Why isn't it clamped to cable clamp

Just found out this one needs a 32 amp as the previous one was a less watt plus getting the cable changed as well. Thank you for your assistance.

 

[Avo Mk8]

But regardless if I place the pot or not it should turn on I atleast ?

If you connected it to a source of power, albeit a lower amperage breaker/cable, then I would expect the control panel to come to life.

Did you read in the instructions that you have to keep your finger on the 'on' button for at least one second for it to come on? Also if you keep pressing it for 3 seconds it starts a setup mode for deactivating sound!

Of course being an induction hob it needs appropriate cookware on it before it will actually heat!

 

[Jock from the north]

Just found out this one needs a 32 amp as the previous one was a less watt plus getting the cable changed as well. Thank you for your assistance.

It seems to say 4.00mm cable ,it looks like 6mm you have in .make sure you use cable clamp when changing cable .

 

[brianmoooore]

It means a 4.0mm2 flex, not T&E. Personally I would connect this with 5 core 2.5mm2 H05RN-F, with a crimped ring terminal on each core, using two for live, two for neutral and one for earth.

 

[westward10]

I'm not sure it is T&E, the cpc is stranded and I doubt it is 10.0mm² where it wouldn't be solid and the green/yellow does not look like sleeving. I don't believe they are in the UK.

 

[brianmoooore]

What happened to the little national flag beside each contributor?

 

[Jock from the north]

I'm not sure it is T&E, the cpc is stranded and I doubt it is 10.0mm² where it wouldn't be solid and the green/yellow does not look like sleeving. I don't believe they are in the UK.

Your right the cpc is stranded.