Fair Wage for my skill set? | Page 3 | on ElectriciansForums

Discuss Fair Wage for my skill set? in the UK Electrical Forum area at ElectriciansForums.net

J

Jonny Rocket

Alright guys, I just wanted to know what you would pay me if I were working for you. Been working 4-5 years doing general electrics. House bashing, fire alarm systems, data cables, antennas, etc. Can safely say I can rewire a house on my own; ringmains, lighting, kitchens, outside lighting, SWA if that's the case, consumer units. Fairly competent if someone asked me to do a fire alarm panel. Intercoms. I can have a go at cameras but need more experience in data cables. Nothing to coax and TV's really. Performance in work I'd say I was enthusiastic, more so than the boss that can be lazy and an arsehole at times. I'm in my 3rd year of college and I will do my 18th edition when it comes out and my AM2 along with completing my portfolio. Not driving yet as I have never needed to. Got most of my own tools within reason. Haha. Just wanted to know what you think I would be worth, had to write an essay because I know it's hard to know someone's value without seeing them work but I've been as honest as I can. Thanks lads
 
Last edited by a moderator:
I started of on ÂŁ27 quid a week on an apprenticeship, it was in the late 80's so equates to about ÂŁ50 a week now accounting for inflation and you think even on ÂŁ3.50 an hour is having it bad, yer don't know yer born lad! :rolleyes:
 
I started of on ÂŁ27 quid a week on an apprenticeship, it was in the late 80's so equates to about ÂŁ50 a week now accounting for inflation and you think even on ÂŁ3.50 an hour is having it bad, yer don't know yer born lad! :rolleyes:
ÂŁ20 a day for half a year then upto ÂŁ30 but bacon butties, a laugh and easy going. And time to read a book on the bus to Leeds! :D
 
Only on ÂŁ50 a day. Just feel like I should be on more by now. Just needed a clue of what I was worth. Don't think I'll leave him for less than ÂŁ90 I couldn't justify letting him down. He'd have to find someone rubbish and start all over with them and I don't think he has the patience. Hahaha


That's northern wages for ya... down south (London) you could probably double that...
 
Be careful is all I would say, sometimes our own echo chamber (friends and family) can give us an exaggerated value of our worth. Be realistic too, You are a 3rd year/stage apprentice and will most probably be getting charged out as such. I think to imply that you have "taught yourself" well that may be being a bit blinkered lol.....Someone has to show you to start with mate. Don't get me wrong we ALL felt like you do when doing our apprenticeship ect but keep your head down and keep applying yourself and you will be wondering what all the fuss was about in a couple of years.
I would also get my driving lessons done if I were in your position...It will increase your value to any employer.
 
Thanks for everyone's input, definitely taken everything on board. Just gonna stick it out. I've done it for this long, I can last another year or two no problem! Don't get me wrong, I've been taught how to do things for sure. But what I mean is when it comes to fault finding or how wiring systems work, I've always had to figure that out for myself because he hasn't got the patience.
 
Same here Doody! Hahaha. I've been working on and off sparking since I was 16. Think I only went up to 30 from 20 when I was 20! Fair Di's though, I was ****
Recently been given more responsibility. I'm now on fuse board duty.
Offered to fit a 12way board on a Sunday for ÂŁ70 :eek: suppose how good a wage it is depends on how long it takes me. 4hours maybe?

(Just fitting, not testing it as well)
 
He's putting me up to 60 a day so I'm happy with that for another year. Hopefully get my driving done shortly and I'll be more valuable and I can ask for another raise, which will hopefully go a fair way of maintaining my van! That's my plan
 

Reply to Fair Wage for my skill set? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
386
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
966
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

ESP - https://www.espuk.com/# is the company you are referring to part of Scolmore
Replies
2
Views
373
  • Question
The video's are an accompaniment to the Book and referenced throughout.
Replies
12
Views
543

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top