Fitting "snubber" to circuit | on ElectriciansForums

Discuss Fitting "snubber" to circuit in the UK Electrical Forum area at ElectriciansForums.net

Joined
Nov 9, 2008
Messages
105
Reaction score
18
Location
Glasgow
Ok so after reading previous post on how to stop the flicker from leds/cfl's when switch is turned off i've bought some contact suppressors!
My question is where on the circuit should these be fitted?
Thanks in advance,
Marc
 
always a bit of trial and error with these. try across L and N at the end of the circuit, and if no joy, try at start of circuit.
 

Reply to Fitting "snubber" to circuit in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
401
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
988
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
Or a combined fitting in each row.
Replies
19
Views
2K
nicebutdim
N
  • Question
We just left it as it was, again the customer didn't seem too bothered, dont think she wanted me digging any further.
Replies
14
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top