FP200 3 phase rating?

[Teddy Lop]

Writing up a sizable EICR, one circuit is utilizing FP200 type cable (don't know the exact brand sorry I know they differ) for a 3 phase condenser, but the only ratings I can find for any softskin cables state single phase AC.

Is 3ph AC even permissable?

 

[westward10]

What you need to look at is the voltage rating of the cable and at a minimum it is likely to be 300/500v so this is fine. If the cores are contained within one cable this is also fine. If the cable is exposed to sunlight this probably isn't fine.

 

[Teddy Lop]

Sorry should have been clearer but I'm looking for a current carrying capacity; the tables I've observed all state DC or 1P AC

 

[westward10]

Use Table 4D2A.

 

[Teddy Lop]

Use Table 4D2A.

Oh, I was under the impression fp had different ratings, think I was confusing it with that "refer to manufacturer" SY stuff, thanks

All I need now is zs for MG 60947-2s, which you think would be easily accessible info wouldn't you

 

[Julie.]

Oh, I was under the impression fp had different ratings, think I was confusing it with that "refer to manufacturer" SY stuff, thanks

All I need now is zs for MG 60947-2s, which you think would be easily accessible info wouldn't you

60947-2 Max Zs Charts - MCCB Zs Tables | Pro Certs Software

60947-2 Zs Tables, look up the maximum Zs value in an instant! MCB's, RCBO's, RCD's, Fuses and MCCB BS EN 60947-2 Zs charts and tables, download here...

www.procertssoftware.com

Includes Zs for MG 60947s

Unfortunately it's £10.

 

[MaintenanceSpark]

All I need now is zs for MG 60947-2s, which you think would be easily accessible info wouldn't you

See attached!

I have the app Julie linked too. Purchased it for Bill Talisman MCCBs but they aren’t on there. Luckily Davesparks helped me with that!

 

[Teddy Lop]

Thanks for that

 

[davesparks]

Oh, I was under the impression fp had different ratings, think I was confusing it with that "refer to manufacturer" SY stuff, thanks

All I need now is zs for MG 60947-2s, which you think would be easily accessible info wouldn't you

All of the information for MG stuff is freely available from Schneider