Discuss Good Morning Thread - Come say good morning, tell us what you've got on today. :) in the The Electrical Exchange area at ElectriciansForums.net

We have this thread on TilersForums.com and it's just been restarted because the old thread had 20,000 replies and 500,000 views. And there were 700 pages. Started to lag a bit on slow connections.

I think we had a bash of this before, but I can't find the thread, so thought I'd start another one off.

If you have time in the mornings, come post in the thread before you head off to work, let us know what you've got on and what the weather is like in your area etc. Anything at all is fine. :)

Posts and likes get counted towards your total stats in this thread.

So GOOOD MORNING PEOPLE - WEATHER IS NICE TODAY IN STOKE. I'M THANKFUL IT'S FRIDAY, HAD A RUBBISH WEEK. THANK GOD IT'S OVER.

View attachment 53708
 
Last edited:
Picture or it never happened. 🤔
[ElectriciansForums.net] Good Morning Thread - Come say good morning, tell us what you've got on today. :)
 
Are those two conduits the same circuit?
That would have been daft - would have used a junction!! No, it’s a 16A radial with a FSU to drop a lighting outlet which is the second run up to the light. Once the guy has cleared out all the other cubicles it’ll just extend and repeat that pattern onwards, at which time I’ll just drop a 3way onto the feed at the top and along it goes…
 
I had nothing planned for this morning, following a couple of days working alongside another forum member. Thus, I decided last night to have a lazy lie-in, so I had a couple of drinks, a Chineses take-away with a friend, and I went to bed about 11pm...started to watch a Netflix series recommended by the aforementioned friend, and enjoyed it so much I binged 4 episodes. Realising how late/early it was, and my eyes were closing, I turned out the light and slept...for about 4 hours...woke and realised I had no need to get up so early, so I put the TV on and watched the next 2 episodes, after taking a big gulp of the glass of water on the bedside table. Instantly discovered that it was in fact the large GnT I had poured the night before, and thought "Oh well, not working today!" and finished it off...as a breakfast beverage it's mighty fine!
Later, I replaced a faulty tide-clock mechanism for a relative, courtesy of the good folks at New Generation Clocks - https://ngclocks.co.uk/ supplying the goods, followed by consuming the leftovers from the takeaway for my lunch. After that I fitted a new boot-liner to my car, kindly bought for me by the aforementioned friend, and it fits well and has a part that flips down to protect the bumper area. It's ideal for loading tool bags etc. and is waterproof and non-slip. It also means I have no excuse not to transport his two Labradors occasionally...
Tomorrow morning will be a lazy start, followed by a walk at Loch Lomond with my sister and brother-in-law and their Springer Spaniel (he pees a lot, so we'll be going in their car!) and lunch at The Village Rest in Luss village...if you live within 30 miles, go there and enjoy! Like so many places these days, they are "dog-friendly" and even have a printed doggy-menu...meaning a menu with doggy treats on it, not a menu where you can choose which dogs to eat...
I never remember to contribute to this thread actually on the morning...so it's more of a "what I did today" for me, so I will leap ahead to Sunday...
Early rise for a round of golf, drive to Helensburgh for lunch at The Sugarboat (go, you'll enjoy!) and back home to watch the final day of the Masters from Augusta.
Monday will see me a full day at my local branch of the Men's Shed for a mammoth ISITEE session (assuming they have gathered all the stuff together, if not, it'll be later in the week).
I have just put a leg of lamb in the oven...I'll check it in a couple of hours and feast while watching the last 2 episodes of the aforementioned Netflix series.
If you have read this far you must have a boring life!
I always like to hear of new stuff to make life easier. The aforementioned forum member put me onto an insulating putty which is great for many applications where silicone is a pain to deploy. I bought some, a different brand, but already have used it a couple of times to seal entry holes in brick, and in outside sockets. Those rubber caps to cover the screw holes in outside sockets never stay in place, but a dab of this stuff does the trick.
Amazon...I ordered something, it arrived, an hour later I was asked "How did you like the **** you ordered?*
I replied..."I ordered a set of 288 stainless steel grub-screws...some cone-pointed, some cup-pointed...so far I have actually used just one of them, so it's hard to rate them just yet, but my toilet-roll holder is still on the wall!
 
@littlespark
The Netflix series is called "Ripley". It's in 8 episodes and shot in black and white. The camera work is fabulous. I'm not one to rave about stuff on TV, but if you like a good murder story then go for it! Not my genre usually, but my pal nagged me to watch it, and I'm glad I did.
 
@littlespark
The Netflix series is called "Ripley". It's in 8 episodes and shot in black and white. The camera work is fabulous. I'm not one to rave about stuff on TV, but if you like a good murder story then go for it! Not my genre usually, but my pal nagged me to watch it, and I'm glad I did.
I was trying to get dan to watch this but he didn't fancy it. We just started the regime on sky Atlantic. I love Kate Winslet.
 
Today I’m hoping to get around to fitting another outside socket at the garage door, and plumb in an outside tap for use with a pressure washer.

I know, I know…. Get a professional in to do the plumbing…. But hey, what could possibly go wrong….


If it goes as well as my other home diy projects, I’ll be doing the same next weekend…. And the weekend after that…. And the weekend after that….
 
Today I’m changing the faulty 30nm motor in my Somfy garage door. For last month it only goes down under power and has to be manually wound to open it.
I’ve done this once before and the replacement failed after 2 years. This time I’m not using the £300 Somfy 30nm part, I’m using a compatible 100nm motor that was £100. We’ll see!
This task starts by drilling out 8 rivets holding the cover on - silly design for anything with a motor and bearings to grease inside.
 
Happy Sunday everyone! Lovely morning here today, blue skies!

There's a sniff of summer in the air
 
It's nice here. 2 lots of washing out already, 3rd just about to finish its spin. Hope it stays nice. I drive to Runcorn later and I prefer to drive in nice weather.
 
Today I’m changing the faulty 30nm motor in my Somfy garage door. For last month it only goes down under power and has to be manually wound to open it.
I’ve done this once before and the replacement failed after 2 years. This time I’m not using the £300 Somfy 30nm part, I’m using a compatible 100nm motor that was £100. We’ll see!
This task starts by drilling out 8 rivets holding the cover on - silly design for anything with a motor and bearings to grease inside.

I changed the start capacitor in mine a couple of years ago. A proper pain of a job, but been fine ever since. It had got so that it always took at least two or three attempts to start opening.
 
I changed the start capacitor in mine a couple of years ago. A proper pain of a job, but been fine ever since. It had got so that it always took at least two or three attempts to start opening.
Interesting. I suspected faulty limit switches in mine...it would either do nothing or run for about 3 seconds and then stop in one direction and run fine in the other direction.
Latterly the little cog light would come on which the manual said was motor failure.
It seems happy enough again with the new motor. If I have time I'll take a look at the old motor...
 

Reply to Good Morning Thread - Come say good morning, tell us what you've got on today. :) in the The Electrical Exchange area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Article
This is an RSS feed of thread: Morning Everybody - Hope all is well? - What have we got on, how are we all doing? Content of the thread: Morning...
Replies
0
Views
217
D
  • Article
Which truly is the Number 1 Best Tile Adhesive Brand? Since 2007 Tilers Forums started an annual best tile adhesive Poll and sent it out to the...
Replies
0
Views
118
D

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top