Good quality tool bag? | Page 2 | on ElectriciansForums

Discuss Good quality tool bag? in the Electrical Tools and Products area at ElectriciansForums.net

Stitching on shoulder strap of my ck magma backpack started going after about 12 months of use. I then purchased a veto pro pack and have never looked back. It's a lovely bag and good quality. So far it's been 2 years and going strong.
 
I am on my second CK open tote now. Probably had about 4-5 years of use between them, and I reckon my current one has another year or so in it. One of the main things I like about it is the roomy and spacious side pockets.

I would happily pay the huge cost of a veto, but their layout doesn't quite suit me. Only one I would consider getting is the OT-XXL but it's extinct as far as I can tell. I would buy one tonight if there was a bit of tweaking and slightly less emphasis on the VErtical Tool Orientation-ing - it has too many of them.
 
dleted cozstoopidtinternet won't allow upload of some freak's copyrite.

[ElectriciansForums.net] Good quality tool bag?
 
Last edited:
I use a Dewalt tote, pouches up side for pliers etc, elastic up sides on inside for drivers and internal and external pouches at end as well, tape measure clip, short fine cut saw holder, and then in Centre I have hammer bolster, 450mm sds bits and a few other larger items, but everything easily found and easy to check everything’s back in place again after a job.
 
I have just loaded up my new toolbag tonight. Never seen nor heard of this particular bag until a few days ago.
First impressions are that it seems pretty decent for ÂŁ100. It's huge, and have had to put my old CK shoulder strap on it as none supplied. I have played around with it tonight and the tools slide in and out a lot better than my old CK. Fnarr Fnarr!!
It's a Toughbuilt 30" open tote. I like how you can move the three different inserts about to suit your needs. Time will tell how well it will last but it seems pretty sturdy.

Piccys -

[ElectriciansForums.net] Good quality tool bag?
[ElectriciansForums.net] Good quality tool bag?
[ElectriciansForums.net] Good quality tool bag?
 
I have just loaded up my new toolbag tonight. Never seen nor heard of this particular bag until a few days ago.
First impressions are that it seems pretty decent for ÂŁ100. It's huge, and have had to put my old CK shoulder strap on it as none supplied. I have played around with it tonight and the tools slide in and out a lot better than my old CK. Fnarr Fnarr!!
It's a Toughbuilt 30" open tote. I like how you can move the three different inserts about to suit your needs. Time will tell how well it will last but it seems pretty sturdy.

Piccys -

View attachment 41926 View attachment 41927 View attachment 41929
have you got access to use of a FLT to carry that for you?
 
I purchased the Klein Ultimate electricians tool bag a couple of months back. Absolutely love it. So much better than my Stanley Fatmax backpack.
Not quite up there with the Veto Pro Pac (which my dad owns and swears by) but decent none the less.
 
I've used the blue CK tool bags for many years and they work well for me. Last time I bought one when I was passing through the UK it was the newer black type and it was well under 30 quid. Generally they last me about 3 years before one of the zips pack up. They may not be the best tool bags but I'm okay with them considering the price.
 
Veto pro packs are good but ÂŁ200 to ÂŁ300 and will make all your tools a target to be stolen, so unless you are jobbing round posh flats in London forget about that or the ÂŁ300 bag and the ÂŁ500 of hand tools get stolen in one hit.

I have a Stanley bag with a solid plastic tray base which is good, got it from amazon, only complaint is that the velcro wrap around on the handles fell apart after about a month
 

Reply to Good quality tool bag? in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
400
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
986
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I'd recommend getting a website up and running ASAP. And sign up to google business thingy so your website ends up in Google maps etc. Fill it...
    • Like
Replies
4
Views
2K
Heh I know the brochures for courses with stock images of women using tools in random scenarios but when you're there it never happens, it's all...
    • Like
Replies
2
Views
371

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top