grid fcu modules .................

[Gavin John Hyde]

Need to put a FCU in to feed outside lights. Ideally customer wants me to use a redundant 2 gang backbox that used to have aerials, phone etc in before he had it all moved about. Currently just a blank plate; Still has old grid plate in cupboard. Would prefer to have the fcu inside as he doesn't want to go outside when cold/wet to turn them on or off.
Never come across a 2 gang sized fcu so looking at grid switch modules.
MK were the first to come to mind but has anybody used the inter compatible euro module ones from Denmans/Rexel etc.. Being a European standardised size all different manufacturers are making modules that supposedly fit but don't want to buy crap that fails after a few months.
So Mk or the cheaper alternatives?
Experiences of different makes and recommendations welcome.

 

[Toneyz]

We only use MK these days everywhere be for that used Deta which was ok more budget used by a lot of the major house builders. I take it it will be a 3g grid with blank or perhaps neon.

 

[Gavin John Hyde]

We only use MK these days everywhere be for that used Deta which was ok more budget used by a lot of the major house builders. I take it it will be a 3g grid with blank or perhaps neon.

he has a 4g faceplate but a 3g isnt really much of an expense. was thinking fcu, switch and neon then out to the lights via junction box outside. if need be i can throw a blank in.

 

[Toneyz]

he has a 4g faceplate but a 3g isnt really much of an expense. was thinking fcu, switch and neon then out to the lights via junction box outside. if need be i can throw a blank in.

best bet if the plate and yoke are already there.

 

[Gavin John Hyde]

best bet if the plate and yoke are already there.

The verve by hamilton euro modules via denmans/rexel and many other of the cheaper modules brands dont use yokes. they just clip into the faceplate.

 

[suffolkspark]

Dont use the designer denmans ones there poop. Hamilton or eaton for me

 

[sam400]

Have you seen the scolmore click mini grid?

 

[123]

Click do a 3 module wide plate that is 2 gang Mode Range(CMA432), Polar Range (PRW432).

Could fit MD022PW (twin module width 20A DP Module) and MD047 (fuse module) to it. Alternatively if wanting a neon and a decent look MD023PW (twin module width 20A DP Module with Neon)