Evening,
I am trying to get a signal from my Sky Q Box in 1 corner of a room to a TV on the opposite wall.
I have ran a CAT 6 cable between the points and terminated RJ45 ends on to each end.
I have tested cable with LAN tester and proves fine.
I have tried the below link for which I had hoped to transmit HMDI using the CAT 6 cable but can not get it to work.
Is there a reason for this? Any help would be appreciated - I am an approved Electrician but not so up to speed with Home Automation.
Below is the link of the ends I have tried.....
https://www.ebay.co.uk/itm/2pc-1080...45deba8516e5d7a12983|ampid:PL_CLK|clp:2334524
I am trying to get a signal from my Sky Q Box in 1 corner of a room to a TV on the opposite wall.
I have ran a CAT 6 cable between the points and terminated RJ45 ends on to each end.
I have tested cable with LAN tester and proves fine.
I have tried the below link for which I had hoped to transmit HMDI using the CAT 6 cable but can not get it to work.
Is there a reason for this? Any help would be appreciated - I am an approved Electrician but not so up to speed with Home Automation.
Below is the link of the ends I have tried.....
https://www.ebay.co.uk/itm/2pc-1080...45deba8516e5d7a12983|ampid:PL_CLK|clp:2334524
As an eBay Associate we earn from qualifying purchases.