Heatmiser network Thermostat issues (EMI??)

[dansk]

So are you saying they shouldn't BOTH run off the UH1 or specifically the Netmonitor needs to hang off the touchpad and the touchpad wires direct to the UH1??

you've got it!

 

[dansk]

when the touchpad and netmonitor are wired to the UH1 they conflict with each other - thats why your not seeing the full network on the netmonitor because as the touchpad and netmonitor refresh the stats can only talk at one go - they cant speak to two things at once hence why they go "offline" when in fact all it means is the thermostats is already talking.

 

[virgilns]

Brilliant!!! thanks - will gibe that a go. sadly just put the floor back down in the airing cupboard so the mrs can get her washing dry...but will try that tomorrow!!

Thanks mate. appreciate it a lot!!

 

[dansk]

your welcome - please will you come back and confirm the outcome?

 

[virgilns]

The least I can do!!

 

[virgilns]

Dansk, sorry it's taken so long to get round t trying this - life's been a bit hectic lately!! but it works perfectly THANK YOU.

Wired the netmon network to the C/D of the touchpad (which was previously wired netmon to network on UH1 and C/D of touchpad to C/D of UH1.)

Got good control of heating via iPhone AND touchpad.

Thank you for the help...much appreciated!!!

 

[dansk]

Good news. Knew it wasn't EMF, heatmiser don't even know their own products....