Help choosing charging outlet. | on ElectriciansForums

Discuss Help choosing charging outlet. in the Hybrid Electric Vehicles Advice Forum area at ElectriciansForums.net

Joined
Nov 6, 2016
Messages
473
Reaction score
898
Location
Blackpool,Lancashire.
I have just bought a Kia Xceed plug in hybrid.The battery charges at 3kw either using the 13amp plug or the Type 2(I think) cable.
My question is the best outlet for charging the car?
I am thinking of running a 6mm twin and earth directly back to the mains and fitting just a 13amp outdoor socket.
Better still would be a Type 2 charging outlet but I don't want a full 7kw charging type.Can anyone recommend a 3kw outlet that I could wire other than a socket outlet.
I have seen a few outlets but they are still over £200.Any cheaper recommendations would be good.
Regards.
BoB
 
I would avoid the "granny chargers" and go for a proper type2.

I managed to pick up a type 2 quite cheaply - if you are not claiming the government funds then you don't have to have the ones which communicate ('smart' metering style) so at the moment there is a bit of a surplus as most now need the smart type
 
If fitting a new circuit for ev charging then there is an argument it still needs same protection as an ev charger such a type a / b rcd and potentially pen fault protection.
Take the grant out of the equation and you could look at the qubeev would need an earth rod or pen fault protection it is £299 QUBEV - EV Charging Unit | Type 2 Socket | 32 Amp/7.2 kW | IP65 | - https://evonestop.co.uk/products/qubev-ev-charging-unit-type-2-socket-32-amp-7-2-kw-ip65?variant=12432393404463
it has a dial on the side to choose the current.
If you ran the 6mm cable from consumer unit out to where you wanted the charger then you could get the grant and have say a podpoinf fitted very cheaply, podpoint fit their own units at cost price so with the cable in situ you would likely pay less than £200

Whether the charger is 32a or 16a is largely immaterial as the car only charges at the maximum rate it can handle. which being a hybrid is often 16A. at least then you future proof the charger so that future cars or visitors can charge at the higher rate. you can have the unit down rated to 16a in anycase., very few manufacturers make just 16a units now, they are all the same spec but have load curtailment inside.
 

Reply to Help choosing charging outlet. in the Hybrid Electric Vehicles Advice Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
693
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

That worked!!! Thanks again for all the help and responding so quickly. Really appreciate it!!!
2
Replies
15
Views
851
I'd always go for 25mm2 5core over 50mm2 3core, with the cores paired up. Considerably cheaper, easier to terminate and ready to go, if ever 3...
Replies
7
Views
431

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top