HELP PLEASE!!! 2365/615 electrical system designs

[John J]

So I’ve recently started my level 3 course and I’m doing electrical system designs the one with the hotel extension and pool and cafe block I’ve done question 1 but stuck on all of question 2 some guidance would be appreciated thanks.

 

[H]

Any chance you could put the question on here, screenshot etc?

 

[John J]

Here

 

[JAWS]

Just reading through that scares the hell out of me. Not looking forward to this unit at all.

 

[Strima]

Don't treat the question as a whole, break it down into its individual parts.

So for part A search online for luminaires and select ones that fill the criteria in the question.

For example 600x600mm LED panel lights 40w rating 4000K colour. Some units will be fitted with 3 hour emergency backup units to comply with emergency lighting regulations.

Units will have to have a suitable IP rating to use within the pool area, refer to section 7 of BS7671 for specific IP ratings in pool areas etc etc.

 

[John J]

@Strima thanks for the guidance much appreciated

 

[Loki]

Here

View attachment 45404

Hi John,

I'm currently doing the same project.

The hotel rooms are like premier inns rooms. sockets either side of beds, 2 double socket on table for tv, kettle etc & socket by the sofa, heater fcu by the door & towel rail fcu outside of the bathroom.
CU in each room by the door.

when i get back home i'll convert my visio file to pdf & pm you so you can take a look.

maybe we can buddy up on this & throw ideas about?

Michael

 

[John J]

@Loki be much appreciated completely lost Atm

 

[Silly Sausage]

For a further hint:
I used to Inspect hotels, each floor had a distribution board supplying small (4 or 6 way) boards in each room. Maybe a power cct, lights, shower etc ...

 

[Loki]

@John J I can't PM you as you have limited who can see your profile.
PM me & I'll send you my PDF file

 

[MFS Electrical]

You should consider joining the trainee area

 

[Toneyz]

Hi John,

I'm currently doing the same project.

The hotel rooms are like premier inns rooms. sockets either side of beds, 2 double socket on table for tv, kettle etc & socket by the sofa, heater fcu by the door & towel rail fcu outside of the bathroom.
CU in each room by the door.

when i get back home i'll convert my visio file to pdf & pm you so you can take a look.

maybe we can buddy up on this & throw ideas about?

Michael

Do they have consumer units in each room?

 

[Loki]

Do they have consumer units in each room?

Yes helps make it easier for load balancing on 3phase & also for not inducing faults into other rooms when a fault occurs.

Also hallway has CU

 

[Toneyz]

Yes helps make it easier for load balancing on 3phase & also for not inducing faults into other rooms when a fault occurs.

Also hallway has CU

I take it that this is locked away behind an access panel.

 

[Loki]

I take it that this is locked away behind an access panel.

In premier inns the CU is usally by the bedroom door up in the corner.​