Help turning off motion sensors

[Jake]

I got these new lights from Philips from the 'mygarden' category that have these motion sensors on them, the only problem is these motion sensors are absolute garbage. I tried to disable the motion sensors but failed hard. I am NOT an electrician nor do i have any experience is that area. I've included some pictures, any help is very appreciated. Thank you

 

[telectrix]

why are the sensors garbage? philips gear is usually OK.

 

[Spoon]

Who wired up the lights? Are they connected to a switch inside? The reason I ask is, if there is no switch and you bypass the motion sensor then the light might be on permanently...

 

[Jake]

why are the sensors garbage? philips gear is usually OK.

They are not garbage. They work as advertised.
they are just a bit too sensitive, they go off with the slightest movement, and because i installed them in my room sometimes i don't want the lights going off when I'm on the computer.

 

[Octopus]

Seeing as your location is over the moon, best you wait until NASA launch their new rocket ....

Or seek local help if you say where you are

 

[telectrix]

They are not garbage. They work as advertised.
they are just a bit too sensitive, they go off with the slightest movement, and because i installed them in my room sometimes i don't want the lights going off when I'm on the computer.

why install outside PIR lights in a room.?

 

[Spoon]

why install outside PIR lights in a room.?

lmao...

 

[telectrix]

 

[Jake]

why install outside PIR lights in a room.?

would i be shamed if i said they looked really good
also they didn't have the one without the sensor in stock then

 

[static zap]

Messrs Heath and Robinson would suggest margarine carton material covering white lens ! IR rays need to pass thru to work !
(or experiment with some of it ) ..
When the rats are big enough to detect you need to move.

 

[Midwest]

All those PIR's are pants; my dog doesn't bite, the cheques in the post and my mother-in-law loves me

 

[telectrix]

and my mother-in-law loves me

well, somebody has to.

 

[LankyWill]

Apart from struggling to see the need for outside lights indoors, why haven’t you provided a cpc for the fitting? That fly lead imposes there’s a need to Earth the fitting, This tells me your aren’t an electrician, best get one to sort out your dilemma. Won’t take much longer that 15 minutes to sort.

 

[KEV 1 N]

Apply some of this to cover the PIR sensor.....

 

[Rpa07]

Some things are just funny - that's all I've got!