Help!! What variable resistor do i need?

[benjihubbs]

Hi,

I need a little bit of help, i am going to wire a battery pack to a small electric motor, but i need to be able to control the speed of the motor. I know i need a variable resistor, but which one? I am really confused and need someone who has the knowledge to explain to me, what resistor i need and how to wire it into the circuit?

If you could maybe post a link to where i could get the variable resistor i need, i would be grateful.



Thanks for reading this

 

[Phil]

welcome along. you could try rs or farnell

 

[kung]

Also the guys at Maplin are good !

 

[kung]

Maplin : 1TB Seagate FreeAgent External Drive

 

[Knobhead]

To let you know the size of resistor we need the following information

Volts
Full Load Amps of the motor
Do you want the speed the vary from 0 to full speed

 

[scotsparky]

if its only a small motor get a dimmer switch and wire through that.

 

[Knobhead]

if its only a small motor get a dimmer switch and wire through that.

Eeerrm From a battery

 

[scotsparky]

tony what is a standard non electronic dimmer ?

 

[benjihubbs]

To let you know the size of resistor we need the following information

Volts
Full Load Amps of the motor
Do you want the speed the vary from 0 to full speed

The motor is from 1.5 - 4.5 volts
it is 1.17 amps max
and yes, from 0 to full speed

 

[Golden_Boy]

Hi,

I need a little bit of help, i am going to wire a battery pack to a small electric motor, but i need to be able to control the speed of the motor. I know i need a variable resistor, but which one? I am really confused and need someone who has the knowledge to explain to me, what resistor i need and how to wire it into the circuit?

If you could maybe post a link to where i could get the variable resistor i need, i would be grateful.



Thanks for reading this

What will the motor be driving?

 

[nickblake]

Try here they have a range of motor controll kits CEBEK Electronic Modules

Cebek R-1CR0001DC Motor Controller Module (6~16V / 1.5A)

 

[kung]

A potentiometer or resistor trim pot for short !

 

[nickblake]

quick point if you are going to use a poteniometer then it will have to be a wire wound rather than a standard other wise youll get a wiffy smell as the wiper burns holes in the track

 

[Knobhead]

The motor is from 1.5 - 4.5 volts
it is 1.17 amps max
and yes, from 0 to full speed

So what votage will you be using?

 

[Golden_Boy]

This info may be usefull.

HO Slot Car Racing - Hand Controllers