help with a price

[jonathan9468]

been asked to quote on this work but have no idea on price any ideas

• 1361 fuses incorrectly rated DB43 2R, 3R, 4R, 5R & 6R
• 88 incorerectly rated DB44, 1,2,3,4,5
• Fuse incorrectly sized DB55 1,2
• Fuse wire incorrectly sized DB8 11TP
• Fuse wire incorrectly sized DB10, 4TP, 5TP & 6TP
• Fuse wire incorrectly sized DB11 8Y
• Fuse/cable incorrectly sized DB50 1,2,3,4,5,6,7,8
• Fuse/cable incorrectly sized DB56 1,2,3,4,5,6,7
• No supplementary bonding in toilets
• No main bonding to gas
• No main bonding to oil services
• Trunking pins missing above DB1, DB2, DB3, DB4
• DB26-27 Fuse carrier cracked
• DB27 tapped of DB26 requires segregation of circuits
• DB28 IPXXB rating exceeded

 

[beaver74]

been asked to quote on this work but have no idea on price any ideas

• 1361 fuses incorrectly rated DB43 2R, 3R, 4R, 5R & 6R
• 88 incorerectly rated DB44, 1,2,3,4,5
• Fuse incorrectly sized DB55 1,2
• Fuse wire incorrectly sized DB8 11TP
• Fuse wire incorrectly sized DB10, 4TP, 5TP & 6TP
• Fuse wire incorrectly sized DB11 8Y
• Fuse/cable incorrectly sized DB50 1,2,3,4,5,6,7,8
• Fuse/cable incorrectly sized DB56 1,2,3,4,5,6,7
• No supplementary bonding in toilets
• No main bonding to gas
• No main bonding to oil services
• Trunking pins missing above DB1, DB2, DB3, DB4
• DB26-27 Fuse carrier cracked
• DB27 tapped of DB26 requires segregation of circuits
• DB28 IPXXB rating exceeded

not enougth info mate

 

[xraytek]

• No supplementary bonding in toilets

Does there need to be then?

 

[beaver74]

Does there need to be then?

with out any further info we want know

 

[rocker]

If there aint any RCDs, then yea. But presuming RCD protection is going to be part of the job, then no.

Oh and to answer your question, work out how much it will cost you, stick your little bit of mark up on materials if you're that way inclined, then estimate how long it will take you and what you are prepared to work for for that amount of time. You will then have your quote.

 

[xraytek]

If there aint any RCDs, then yea. But presuming RCD protection is going to be part of the job, then no.

I thought the requirement was for rooms containing a bath or shower, but didnt think it applied to rooms that only contained hand basins?

 

[bugsy]

Obvoiusly report from PIR or simular, Without going to pay a site visit your just guessing

 

[drywax]

supplementry bonding isn't required if there is RCD protection but alot of people still do just out of good practice.

There is a reg but I can't tell you exactly what it is as I don't have my book with me