Hi there everyone! I am new here!

[Munteanu Cristian]

I just finished my Lev 3 Electrical installation studies and looking to work into this. I will need some more practice first I know. Glad about this forum. Hope to learn a lot of things here.
I bought an MFT 1502/2 Megger tester. Does it need calibration?
Cheers. Cristian

 

[telectrix]

welcome to the asylum. as for the MFT, good choice. you could save a few bob by just comparing it with a mate's calibrated unit, test at a particular socket/ whatever and compare readings. make sure you test using both the plug in lead and the 4mm leads.

 

[Pete999]

I just finished my Lev 3 Electrical installation studies and looking to work into this. I will need some more practice first I know. Glad about this forum. Hope to learn a lot of things here.
I bought an MFT 1502/2 Megger tester. Does it need calibration?
Cheers. Cristian

Yes of course it needs calibration, along with a calibration certificate, if you are intending to join one of the CP Schemes then calibration is one of the prerequisites of joining.

 

[Specialist]

Hi & welcome. If you need your MFT calibrated try OSCS, very good to deal with & very cheap.

 

[telectrix]

Hi & welcome. If you need your MFT calibrated try OSCS, very good to deal with & very cheap.

not only that, but he will come to you. saves on courier costs.

 

[Specialist]

He was a bit too far to come to me, but sent it off & had it back within 72 hours.

 

[Lou]

Welcome to the family!

 

[telectrix]

He was a bit too far to come to me, but sent it off & had it back within 72 hours.

think his passport had expired and he'd forgotten his wellies..

 

[Specialist]

think his passport had expired and he'd forgotten his wellies..

Your only jealous because you don't live in sunny Wales

 

[MODECSOFT]

Welcome