High bay lighting | on ElectriciansForums

Discuss High bay lighting in the Commercial Electrical Advice area at ElectriciansForums.net

Leesparkykent

Nearly Esteemed
Joined
Dec 10, 2012
Messages
9,784
Reaction score
10,189
Location
Kent
I'm currently looking at a job atm which is big warehouse with a racking system and currently open 24hours a day. The owner wants to replace all the 400W high bays with something more efficient and in turn will end up paying for itself probably a few times over. I've been looking at some LED high bays with built in programmable daylight harvesting/ presence detector. http://www.fitzlight.co.uk/wp-content/uploads/2015/10/Fitz_DataSheet_PolarisLED.pdf just wondering if anyone else has done something similar and what products they used...what I've been looking at is each fitting will dim down depending on natural daylight coming in to the building but will maintain a constant lux level also having the presence detector so the lights down the isles/racking will only come on as the forklift enters.
 
Sounds quite a smart system and probably worth adding the sensors to the fittings if the cost of the sensors is quite low. If the forklift traffic is consistent though it may not be worth adding the motion sensors.

The only high bay LED system I have done was conventionally switched due to the warehouse being built with no skylights and the bays in more or less regular use throughout the day. I would definitely recommend the fittings we used though if you are interested.
 
I'm hoping to find out costs etc tomorrow. The bays are used frequently but not that frequently to not have a sensor I think. Going to ask these questions tomorrow about the frequency of switching shortening the life span etc.
 
I've done a small warehouse last year, it had 3 x 400w high bays per aisle, and had 8 aisles. (9.6kw total) I Changed them for 1 x 113w led high bay per aisle (0.904kw) which gave better light output than 3 x 400w fittings. I used GE fittings that my wholesaler recommended. I gave him my specs and he ordered the fittings to be made to my requirements, (height from floor, aisle size, beam angle etc.) The fittings cost me around ÂŁ400 + VAT for the 113w version but they had a 16 month payback term and a 5 year warranty so a no-brainer really. I would highly recommend these fittings and my customer was over the moon also. GE Albeo High Bay Lighting Fixtures | Commercial | GE Lighting North America
 

Reply to High bay lighting in the Commercial Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
291
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
800
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
831

Similar threads

My experience with commercial lighting is when the fixture is ordered or bought the specs should say 120/277. Then their wiring diagram should be...
Replies
7
Views
556
  • Question
Thanks for the input guys. Lighting track is out of the question. The routing (h section guirders and angle iron) means that swa cable clipped...
Replies
12
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top