Anyone have a one line diagram of a typical UK or EU hospital?

How are the emergency branches divided per code? How many ATSs? What is typical?
 
I presume since you haven't put a location and are referring to code and flashlights you're in the US?

Seems an odd request for just inquest
 
Ok, I'm learning all ready. What is the difference? The building never looses power vs just enough for what code requires be backed up?
No Break, exactly what it says no break in the supply
Stand By, Loss of power, everything dead until Genny takes over.
 
Like an uninterruptible power supply with a battery? What loads get that or are required to?
Normal supply run through an on line UPS, power cut, UPS takes over until Genny is up and running and takes over from normal supply, load shedding is in operation to shut off all non essential loads.
 
Normal supply run through an on line UPS, power cut, UPS takes over until Genny is up and running and takes over from normal supply, load shedding is in operation to shut off all non essential loads.

What loads would the UPS supply?

Also are the receptacles serving patient care beds fed by a dedicated electrical branch or ATS?
 

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Joined
Location
Earth

Thread Information

Title
Hospital Emergency Power System
Prefix
N/A
Forum
UK Electrical Forum
Start date
Last reply date
Replies
80
Unsolved
--

Advert

Thread statistics

Created
Cookie,
Last reply from
Cookie,
Replies
80
Views
7,730

Advert

Back
Top