How do I wire two ceiling fans with light kits on one switch?

[Derek 22]

How do I wire two ceiling fans with light kits on one switch?

 

[Simon47]

How do you want them to operate ?
Is it as simple as "switch on, fan & lights come on; switch off, fan & lights go off" ? Presumably with a separate switch built into the fan to locally control the fan & light locally ?

If that's the case, then you wire them just the same as you'd wire two pendant lights - switched line to one unit (either neutral direct to unit, or via the switch), and loop off the switched line & neutral off to the second unit. If the fan & light combo has separate connections for the light & fan, then you link these together (both neutrals to the supply neutral, both line connections to the supply line).

 

[Togalonn]

How do I wire two ceiling fans with light kits on one switch?

Control both fans via a single hot wire from the switch, with neutrals/grounds paralleled. Ensure:

Circuit capacity supports combined load (typical 15A circuit handles 2×1A fans + 2×60W lights)
Use 12/2 w/gnd cable between fans