How not to install a temp supply

[nickblake]

Here's one for a construction site im working on , multiple feeds to multiple flats under full renovation , i have installed a small board main switch RCD and 2 twin socket outlets for use around the site , the day i started first fix i find the supply I installed not in use and some muppet had installed sockets on the other 2 bit of 1mm 3 core flex straight off the 80 amp supply nice and yes it was supplying the 110 volt transformer beggars belief

 

[amlu]

builders :-(
have a look in the service fuse there is slight possibility that they busted it already and stuck a bolt in place of it.

 

[7029 dave]

Nice, double socket straight off the supply, least it's through an isolator lol

 

[Silly Sausage]

Like the way they seem to be building a stud wall in front of it all with the stud in between the intake and isolator.
I wish I was that thick that I didn't give a ----!

 

[Guest111]

Time to get the cutters out,duty of care and all that,imagine how you'd feel if someone got a belt because of that dodgy tranny.Go on you know you want to.

 

[amlu]

builders will twist wires together or use choc block if they find one in the skip then come to you asking for insulation tape.

 

[Robotstar5]

Surprised they bothered to fit a patress and earth wire!

 

[StevieTee]

On the second picture, how do you use the left hand side socket?!!

To to be honest, that looks better than what I have seen before lol

 

[Sparky Pat]

Nice to see their using the PME for earthing and not bothering with an rcd and rod for the temp supply