- Joined
- Aug 24, 2009
- Messages
- 23
- Reaction score
- 0
I am currently studying the 2357 qual and have got a little stumped on a question about the size of cable between 2 DB's.
What i am stuck on, is that i am not sure if the cable is sized using the size of mcb used for each of the circuits at the new DB, or whether its done by the rating of each of the sockets i.e 0.5A per socket.
Any advice on this would be greatly appreciated.
What i am stuck on, is that i am not sure if the cable is sized using the size of mcb used for each of the circuits at the new DB, or whether its done by the rating of each of the sockets i.e 0.5A per socket.
Any advice on this would be greatly appreciated.