How to remove wire form Parker VFD | on ElectriciansForums

Discuss How to remove wire form Parker VFD in the Talk Electrician area at ElectriciansForums.net

Kootni

-
Joined
Jul 2, 2018
Messages
32
Reaction score
0
Location
Birmingham
Hi
Have a Parker Integrator 690 series AC VFD drive. cannot take the wires out of push terminals.
Any ideas how to take the wires out? Tried screw driver etc but not sure how they will come out.

Pic attached

[ElectriciansForums.net] How to remove wire form Parker VFD
 
Guys
Nope. Still no luck.
Its a hell of a job and don`t want to damage insides by shoving things with force.
Any particular instrument i can use??
 
a bradawl might do the trick. push in and a bit of sideways pressure. some of these connectors require a probe pushing in with quite a bit of force to release the spring contact.
 
Normaly use a small terminal screwdriver. I found those weird ones that have a neon that lights up just the job for this. It's about the only thing they are good for.
 
You sometimes have to lever the screwdriver a bit when you put it in...

No rude commends people..:)
 
Normaly use a small terminal screwdriver. I found those weird ones that have a neon that lights up just the job for this. It's about the only thing they are good for.
far too thick ( the screwdriver, not you). maybe a wiha slim 1.5mm can do.
 
far too thick ( the screwdriver, not you). maybe a wiha slim 1.5mm can do.
Thanks :)
Those useless neon screwdrivers fit the ones we use (Schneider (spit!)) Wiha is a bit expensive just for that job though. May as well get a cheap B&Q jobbie.
 
was working a few years ago on German made conveyor belt system. the wiha slim 1.5 was the only tool that would do the job quickly and without damage. new equipment and we were doing a few hundred /day, along with running the multicore flexes off 1000m drums.
 

Reply to How to remove wire form Parker VFD in the Talk Electrician area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
956
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Hi James, At the inverter end the multi strand is ferruled and torqued in the terminal and at the motor end they are the “wago type” push fitting...
Replies
2
Views
381
The white is the neutral. The black is hot to the light, brown is hot to the fan… (or other way round) I did this myself once, but it was in...
Replies
2
Views
499

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top