I am just lost for words.......

[EWP]

 

[westward10]

This how it should be done.

What fitting wonky breakers

 

[Des 56]

It just a pictured shared by our trainer on what some mupets do.

There is certainly a Muppet award for making a shower room around those boards
Builders eh

 

[Deleted member 26818]

Not sure I like the busbar being exposed like that.

 

[westward10]

Not sure I like the busbar being exposed like that.

The shield is laying in the bottom of the board.

 

[Deleted member 26818]

The heights of the conductors into the RCDs are different, Neutral is higher than line.

 

[Dave OCD]

The heights of the conductors into the RCDs are different, Neutral is higher than line.

Factory links designed that way so they have clearance to cross over each other at the back of the enclosure. You should get out more.

 

[sparkdog]

Obviously an "Electric" shower.

 

[davesparks]

This how it should be done.

I wouldn't say that's how it 'should' be done, it's a reasonable attempt but I wouldn't accept it.

 

[LewisM]

This how it should be done.

You didn't do this one as well by any chance?
http://i.Upload the image directly to the thread.com/ME6NCxZ.jpg

 

[GMES]

Obviously done by a plumber, here are some switches his mate
did in the same room.

 

[a-z electrics]

Well it's the right way round to let the water run out.. come on give the lad some credit

 

[a-z electrics]

....also negates the need to put guttering under the bus bar....