I tabbed my regs book for my exam today | on ElectriciansForums

Discuss I tabbed my regs book for my exam today in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 4, 2021
Messages
115
Reaction score
44
Location
Camberley
But one has fallen out. I saw it in my Van this morning just sitting there on the floor. I'm at work all day and then I'll be going tonsit it so I'm not gonna have a chance to go through the regs book to 're assign this bloody tab

If i show you the tab I don't suppose anyone would no what page it's supposed to be stuck to do they.
 
Go on then show the tab?

[ElectriciansForums.net] I tabbed my regs book for my exam today
 
Hi,
You have probably wanted that tab to go on page 64 of the regs book, which is the Zs values for RCD's. I know my learners are not too keen on calculations, but if you understand how those values were derived then you would not need the table or the tab. Transposing the formula on the same page from 411.5.3 divide 50 by the operating current in amps for the RCD or the RCD part of an RCBO and you will have the Zs value in that table.
Example1 50/30mA= 50/0.03=1667 ohms
Example2 50/100mA=50/.1 = 500 ohms
God luck with the exam
 
Thank you @westward10 and @jc_150 for your help there and cheers to everyone else for getting involved. I have to admit you've all been very helpfull I'm on the trainee forum but this forum is much better for a quick answer so cheers guys for being so helpfull towards me.

Ps. Just for entertainment purposes I'll get a pic of my tabbed bs7671, gn3 and osg. I haven't gone crazy but there is a few in each.

So glad it's open book I'm surprised it wasn't back in the day because surely if your out on site and have only recently just acquired your 2391 you not gonna sit there and guess your gonna whip out your books just to confirm or check some thing.

After a year or 2 I expect I'll have memorized every thing to the T but I'll would still have no shame in pulling out my books although I can understand how this may make you look incompetent to a client/collegue but I'd rather be safe then sorry at the end of the day
 
Thank you @westward10 and @jc_150 for your help there and cheers to everyone else for getting involved. I have to admit you've all been very helpfull I'm on the trainee forum but this forum is much better for a quick answer so cheers guys for being so helpfull towards me.

Ps. Just for entertainment purposes I'll get a pic of my tabbed bs7671, gn3 and osg. I haven't gone crazy but there is a few in each.

So glad it's open book I'm surprised it wasn't back in the day because surely if your out on site and have only recently just acquired your 2391 you not gonna sit there and guess your gonna whip out your books just to confirm or check some thing.

After a year or 2 I expect I'll have memorized every thing to the T but I'll would still have no shame in pulling out my books although I can understand how this may make you look incompetent to a client/collegue but I'd rather be safe then sorry at the end of the day

Don't worry about it, you'll never remember everything in the regs. But you will learn the key points, and have the ability to find the things you need. Especially when something unusual crops up.

I guarantee nobody has memorized the section on access gangways! Well, maybe Westy has ?
 

Reply to I tabbed my regs book for my exam today in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
293
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
801
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
833

Similar threads

Well yes obviously, but if the transformer is indoors and your lights are 50m down the garden then it's very easy to need pretty big cables at...
    • Like
2 3
Replies
42
Views
2K
That is very cool. It would be the end user software that would make that the absolute king.
    • Winner
    • Like
    • Informative
Replies
1
Views
467

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top