Ideal logic C35+ with Halo Lite RF ( not wi-fi) Trying to find an answer to my question regarding "load compensation" Once Halo target temp of 20*c is reached , + another 5* (20'5*c) and the red flame in the display and green "demand" light
on the reciever go out, the boiler still kicks in and out every 5- 15 mins until end of program. From what i've read, this is due to the "load compesation" built into the Halo prt.
My question is.............when the load compensation is active ie; boiler kicking in when stat is off (no demand) and target temp reached. Will the red flame symbol and green demand light on reciever be on or off . Bascicaly, in a nutshell, the boiler is kicking in when there is no Demand lights or flame symbol.
Thanks peeps.
Ideal logic C35+ with Halo Lite RF ( not wi-fi) to read more on the original thread at Plumbing Advice
See also UK Plumbing Advice for all UK plumbing advice needs.
on the reciever go out, the boiler still kicks in and out every 5- 15 mins until end of program. From what i've read, this is due to the "load compesation" built into the Halo prt.
My question is.............when the load compensation is active ie; boiler kicking in when stat is off (no demand) and target temp reached. Will the red flame symbol and green demand light on reciever be on or off . Bascicaly, in a nutshell, the boiler is kicking in when there is no Demand lights or flame symbol.
Thanks peeps.
Ideal logic C35+ with Halo Lite RF ( not wi-fi) to read more on the original thread at Plumbing Advice
See also UK Plumbing Advice for all UK plumbing advice needs.
