Indoor outdoor wire for indoor to outdoor back indoor | on ElectriciansForums

Discuss Indoor outdoor wire for indoor to outdoor back indoor in the DIY Electrical Advice area at ElectriciansForums.net

Joined
Jun 30, 2023
Messages
2
Reaction score
0
Location
NY
I need to run a electric wire from the garage to outside against the house and back into the kitchen for a stove can I just use a outdoor wire and strap it to the house siding our do I need a conduit.
 
Cable needs to be specified for the worst environment it passes through.
 
I need to run a electric wire from the garage to outside against the house and back into the kitchen for a stove can I just use a outdoor wire and strap it to the house siding our do I need a conduit.
I guess my question is why are you feeding the stove from the garage. Please be more specific. The NEC states that if the wire is subject to physical damage then it is required to be in conduit. As stated above the wire needs to be approved for wet locations.
 
  • Like
Reactions: DPG
I guess my question is why are you feeding the stove from the garage. Please be more specific. The NEC states that if the wire is subject to physical damage then it is required to be in conduit. As stated above the wire needs to be approved for wet locations.
The breaker panel is in the garage currently no 220 outlet for an electric stove we currently use a gas stove so want to run the wire to outside and over to kitchen. I have a raised ranch so kitchen is on upper level
 
my choice would be SWA, suitably cleated and glanded at both ends. Using the armour as cpc or having a separate cpc
 

Reply to Indoor outdoor wire for indoor to outdoor back indoor in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
356
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
909
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

It's galvanised and provided you coat any cut edges with galv spray there should be no signs of undue corrosion any time soon. Galv trunking...
Replies
7
Views
446
nicebutdim
N
Replies
25
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top