Induction loop help plsy

[grandfortune]

http://www.canford.co.uk/ProductResources/ig/5653.pdf

SIGNET (AC) - PDA200E INDUCTION LOOP AMPLIFIER | Premier Farnell CPC UK


hi all

doing my first induction loop system

basically fire alarm guy advised me on what to do and sent me the above products

he told me to run a cable around the room and that's what I've done,

ive wired the PDA200E to the mains and put the two ends of the loop in, now I'm struggling to connect the mic system up to it

It's a hall where meditation will take place so hopefully no need for the Apm boxes which have come as I haven't put the wires in, so he or she can just talk into the wireless microphone that's come ,don't understand how I can wire them together ,

any help would be great

thanks
grand

 

[grandfortune]

thanks bud

so these two would be the best

http://www.amazon.co.uk/dp/B003OSPS...m=A3P5ROKL5A1OLE&pf_rd_r=07PAH5QGKDBQV7VGHBQA

XLR to XLR lead - has182 - H A S Consultants Ltd

 

[tazz]

The xlr to xlr cable is ok.....but the xlr to 3.5mm is stereo ......needs to be mono.

This is mono version http://www.amazon.co.uk/Stagg-SAC1M...121874&sr=1-2&keywords=xlr+male+to+3.5mm+mono

 

[davesparks]

The xlr to xlr cable is ok.....but the xlr to 3.5mm is stereo ......needs to be mono.

This is mono version http://www.amazon.co.uk/Stagg-SAC1M...121874&sr=1-2&keywords=xlr+male+to+3.5mm+mono

That's a balanced cable, so the jack will be connected as balanced mic connection.
A CD player will be outputting a line level signal which should be fed in to a line input rather than converted to xlr and fed in to a mic level input.

 

[tazz]

This is why the outreach socket is used, it gives a line input for mic or direct input, by using phantom voltage......in other worlds you can connect anything through this input