Does anyone have any experience of installing Enkin PDM250 Multi-way dimmer modules? We have 4 dimmers at different ends of the kitchen / dining room, which have been wired two way (with 3 core cables). Each dimmer controls a different light in the kitchen / diner— Downlights, Over Island pendant, under wall unit LED strip and a pendant in the dining room.
We have power to modules, but nothing works when dimmer is pushed or turned to change the brightness. Assuming the modules are all working correctly and this is a wiring issue.
Could anyone with any experience of fitting this type of “intelligent” dimmer module help!!
Documentation from Enkin not great in terms of troubleshooting, so a bit stumped.
Thanks in advance.
We have power to modules, but nothing works when dimmer is pushed or turned to change the brightness. Assuming the modules are all working correctly and this is a wiring issue.
Could anyone with any experience of fitting this type of “intelligent” dimmer module help!!
Documentation from Enkin not great in terms of troubleshooting, so a bit stumped.
Thanks in advance.
