installation life expectancy | Page 2 | on ElectriciansForums

Discuss installation life expectancy in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Just rewired a VIR house and the cable under the floor was fine.... Made in Lydbrook in the Forest of Dean :smug: Didnt appear to have degraded at all, however where it has seen the light of day, or been warmed .... Different story.
 
At the end of the day, you can say that of any cable.

[ElectriciansForums.net] installation life expectancy
 
Just rewired a VIR house and the cable under the floor was fine.... Made in Lydbrook in the Forest of Dean :smug: Didnt appear to have degraded at all, however where it has seen the light of day, or been warmed .... Different story.

Any damage to the old VIR/TRS is generally limited to the connected ends, especially at incandescent enclosed light fittings and accessories, or at outlet points that have been carrying current at or over it's CCC for many years. I've stated before, that i used the TRS cable i pulled out of my parents house, to wire the sockets in my fathers garage, and it's probably still there to this day. It was in pristine condition, and just the job for wiring a freezing cold garage... lol!!
 
Even the 5WWs know that a BS3036 DB is ILLEGAL and needs to be replaced before the house explodes.

They never told me that .... which short course did you learn that on?

I know it can keep tripping all the RCBO's if you havent got all your supplementary bonding in-place and even that sometimes the back boiler fuse will blow if you've got the tin bath to close to the fire but the house exploding?!?!
 
[ElectriciansForums.net] installation life expectancy
Originally Posted by Andy78 [ElectriciansForums.net] installation life expectancy
Even the 5WWs know that a BS3036 DB is ILLEGAL and needs to be replaced before the house explodes.

As far as i'm aware, Wylex 3036 type CU's are still available to this day!! ...At least i know they were up to around 3 or 4 years ago....
 
I saw some figures I think on the IET site around ten years ago, that gave PVC a lifespan of 69 years subject to full load for a quarter of the time, very few domestic circuits would work that hard. I'll attempt to find the source of the figures this week.
In the end we simply test it and confirm or not that it is satisfactory for continued use, as others have pointed out already.
Cheers
 
Think you'll find that manufacturers will still state 25 to 30 years, but they always add in those magic words, ...''a Minimum of''!! Along with a bunch of provisos ...lol!!
 
As far as i'm aware, Wylex 3036 type CU's are still available to this day!! ...At least i know they were up to around 3 or 4 years ago....
GASP! But....But....But A Electrical Trainee told a client of mine that they were ILLEGAL! Surely the chap wouldn't have lied?
:)
 
They do make you laugh at times!! Has anyone here seen any standard electrical installations ever running at or even close 70C?? I know i certainly haven't... Maybe someone like Tony, that's worked in steel Foundries and the like, may have??

7 years if the cable is running at 80C, ...hmm, i don't think i'd like to take that risk, not that the installation would be able to comply in any way shape or form, to any international recognised code/regulation that i know of anyway...
 

Reply to installation life expectancy in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
257
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
739
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
721

Similar threads

Duh!!! Just re-read Op's original post, it was converted to a RFC!
Replies
12
Views
681
  • Sticky
I'm going to get the wording wrong because I am far too lazy to look it up. A previous version said 'must be followed' now says 'should be taken...
Replies
4
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top