Installing a 100 amp Subpanel in garage

[JasRam]

Hello All, Just looking for a bit of advice on the diagram I have laid out for adding a 100 amp subpanel coming from my 200 amp main. This will be going to an attached garage that requires about 45 feet of wire. The garage is drywalled, so I will be using conduit over the existing drywall, as I don't mind how that looks. Sorry for the rough drawing. Does the drawing look accurate, of would you approach this in another way?

 

[JasRam]

Not sure why this was moved from the DIY forum?

 

[DPG]

Not sure why this was moved from the DIY forum?

We have a US forum on here. A couple of members are from over there and will probably check the US section more often.

 

[Megawatt]

Hello All, Just looking for a bit of advice on the diagram I have laid out for adding a 100 amp subpanel coming from my 200 amp main. This will be going to an attached garage that requires about 45 feet of wire. The garage is drywalled, so I will be using conduit over the existing drywall, as I don't mind how that looks. Sorry for the rough drawing. Does the drawing look accurate, of would you approach this in another way?View attachment 100391

Your sub panel needs to have a neutral bar which should come already installed and a separate ground bar which usually you have to install. It looks like that you have a main lug only panel which is fine with a 100 amp breaker feeding it. You must keep your neutrals separate from your equipment grounds.