Installing an Aqualisa Shower Procesor

[Jon Bridges]

Hi, has anyone installed one of these before? I am working with a plumber who is installing it into the loft. It is to be on a 3 amp switched fused spur. Is there any reason I cant run it from the lighting circuit, as this is obviously accessible in the loft.

Any thoughts would be greatly appreciated.

 

[bugsy]

Depends on the connected load ( number of lighting points ) if it's wired in 1.5mm t&e you might be able to uprate the mcb to 10a

 

[marksparky]

yeah installed one few weeks back will do fine off the lights as long as not overloaded they use hardly any juice is it one of the ones with a data cable down to the control button?