insulation lump test | on ElectriciansForums

Discuss insulation lump test in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

G

Graham Coughlan

Could someone please help me understand insulation lump test. I've had a look through gn3 but i cant find anything that says "insulation lump test" as such.

Am i missing it or is figure 2.3 on page 39 pretty much it?


My final 2394 test is today!!


Cheers
 
Well been at this game for 20+ years and never heard of it.
Unless you mean the combined test.
Gn3 method 2
Disconnect main Supply and neutral.
Test between all line conductors and earth.

Basic really
 
The question ive got is: 19 - Four circuits have insulation resistances of 40MΩ, 50MΩ, 100MΩ and 100MΩ. When tested together (insulation lump test) what would be the expected reading:
 
been on a couple of sites where the scruffy gits have left a massive turd in the toilet BEFORE it's been plumbed in.

Not unusual for brickies on the lump, caught short? Oh ......not to be a plumber
 
We're all supposed to do a lump test now and again. But I've heard it's best done after a hot bath, and I don't think water and voltage mix well. Not that I fancy sending 500V through the boys anyway !
 

Reply to insulation lump test in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
305
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
825
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
916

Similar threads

Continuity of the suspect cable appears fine all cores, from this I could work out the length of it and it really doesn’t appear looking at the...
Replies
2
Views
333
I'd speak to an independant company about fixing this, you'd expect it to be a relatively simple adjustment and not require much in the way of...
Replies
12
Views
1K
davesparks
D

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top