Ip44 230v zone 1?! | Page 2 | on ElectriciansForums

Discuss Ip44 230v zone 1?! in the Lighting Forum area at ElectriciansForums.net

Can we see this fitting and where are you installing it.
I want to put it above my shower its a small shower room so the tray takes up most of the room...

From the tray to the ceiling it measures about 2.15m so the light would be just above the shower head

But from the floor to the ceiling it measures 2.4m there is a massive step into the shower
 

Attachments

  • [ElectriciansForums.net] Ip44 230v zone 1?!
    16087548787805874719257845300547.jpg
    251.9 KB · Views: 9
It does suprise me that a room containing a bath/shower isn't IP66 /IPX6 as minimum, purely based on the fact you can fill a cupped hand with water and throw it at the ceiling/light fitting, same with a showerhead (unless fixed spraying vertically down - Just with improved accuracy thanks to the Jetstream)
 
If you throw a cupped hand of water at an IPX4 rating fitting it should be protected. This rating is for splashing of liquid from any direction.
You said you would use a higher ip rated fitting but the ip44 fitting complies?

Its hard to find ipx5 or 6 or 7 lights i have been looking for ages :/
 
Water jets as in above a shower but still in zone 1
This is mainly aimed at water jets used for washing and cleaning that are not from a fixed source, so a standard shower head pointing downwards would not apply.

If you had one of those fancy showers with several wall mounted heads that automatically rotate and spray water everywhere, much like an automatic car wash, then you would need a better IP rating.

Although the zones do have a height limitation there's the application of common sense, what's the likelihood that the fitting will come into contact with water and in what amount? In the vast majority of applications IP44 is more than acceptable, BS7671 gives us the minimum rating to work to.
 

Reply to Ip44 230v zone 1?! in the Lighting Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
351
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
899
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Unfortunately I don't think you will get an "off the shelf" diagram for the system you are trying to do The Wiser system is very adaptable but it...
Replies
1
Views
482
Thank you..... & did have all the fan isolator/ fuse in same plate (click) so quinetic wouldn't worked on this occasion
Replies
12
Views
763

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top