Is it now a requirement to loop in at the switch? | Page 2 | on ElectriciansForums

Discuss Is it now a requirement to loop in at the switch? in the UK Electrical Forum area at ElectriciansForums.net

spud1

-
Arms
Joined
Oct 23, 2010
Messages
354
Reaction score
54
Location
Somerset
Hiya!

Is it now requirement under the 18th to loop in at domestic light switches to provide a neutral at the light switch for electronic or indication functions on switches, or did I dream it?

If so I take it/hope this would only apply in new build?

Cheers

Spud.
 
Indeed, it was frowned upon until fairly recently, I've even had another trade on site telling me he was told it was 'illegal'!
I think this stems from the days of round pattern switches with no back box where clearly there was nowhere to terminate a N. Eventually it dawned upon the trade that there was no valid reason for a N at a switch being frowned upon, but the prejudice still persists with some old stalwarts. The usual argument is that there is no reason for it to be there, which rather ignores the fact that a 3 plate ceiling point has a permanent live which has no reason to be there. E54 would be turning in his grave at the thought that Bs7671 actually recommends such an aberration.
Yes, it was a big no no, even at college on practical plus in all the craft principles books, no N's at any light switch unless of cause it was through double pole switch's.

E54 would be turning.!!
 
Indeed, it was frowned upon until fairly recently, I've even had another trade on site telling me he was told it was 'illegal'!
I think this stems from the days of round pattern switches with no back box where clearly there was nowhere to terminate a N. Eventually it dawned upon the trade that there was no valid reason for a N at a switch being frowned upon, but the prejudice still persists with some old stalwarts. The usual argument is that there is no reason for it to be there, which rather ignores the fact that a 3 plate ceiling point has a permanent live which has no reason to be there. E54 would be turning in his grave at the thought that Bs7671 actually recommends such an aberration.
 

Reply to Is it now a requirement to loop in at the switch? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
369
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
933
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
Firstly I would suggest that of the three sets of cables, they are not all 'incoming'. There might be one cable (of 3 wires) bringing in permanent...
Replies
1
Views
756
"It works" and "it's safe" are not necessarily the same thing. With DIY work, they are often far from the same thing.
Replies
7
Views
728

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top