Is it OK to fit a socket with edges to a rounded surface mounted pattress box

[jonnystewart]

Hi,

I was wondering is it OK to mount a double socket with edges onto a rounded edge surface mounted pattress box

Thanks

Jonny

 

[HappyHippyDad]

The edges would be classed as 'sharp' objects, the wiring regulations show these edges could cause injury or even death. Never experiment with electricity.

 

[7029 dave]

It looks ****e but thats about all.

 

[Andy78]

It'll explode the instant you screw the faceplate back, don't even consider it.

 

[Leesparkykent]

It'll explode the instant you screw the faceplate back, don't even consider it.

I made that mistake the other week :6:

 

[stevey1983]

No, doesn't comply with manufacturers instructions to use the manufacturers pattress. Also make sure your using the correct screws and sleeving as per the manufacturers instructions

 

[HappyHippyDad]

Sorry Jonny, we're just having a little bit of fun:smile5:

Yes, it is ​

absolutely fine to use a square edged socket with a soft edge surface mounted box. Does look a bit pants though a Dave said.

 

[Risteard]

Does look a bit pants though a Dave said.

A bit? It's absolutely horrendous looking!

 

[UPS]

Nearly as dangerous as a chrome accessories on a white plastic pattress.

 

[PEG]

Do not worry...if,say your tenant,decides to replace all the plastic face-fronts,with chrome plates,and they stand proud to a degree...because they can employ a plasterer to skim these in,like a dozen shiny boils...fixed for an eternity...:uhoh2:

 

[davesparks]

It'll explode the instant you screw the faceplate back, don't even consider it.

Everyone loves a good explosion now and again don't they?

 

[ian.settle1]

It'll explode the instant you screw the faceplate back, don't even consider it.

Only if your working live.

 

[electrocat]

Its not aesthetically pleasing but OK as long as no one can stick a thin metallic object behind the corners of the faceplate.