Is there a "proper" way to become a domestic installer? | Page 3 | on ElectriciansForums

Discuss Is there a "proper" way to become a domestic installer? in the Domestic Electrician Forum area at ElectriciansForums.net

R

RAW85

I need some help please...

As I've read on this forum the 1 week course are a big no no. I want to learn properly but can't live on the electricians mate's wage whilst I learn to do the NVQ.

I want to learn a new skill as the job I'm in looks bleak for the future ahead. I don't think the company will close any time soon but I doubt I'll be working there until my retirement.

The domestic installer route seems the right path as I would be looking to do domestic maintenance a day a week (i currently work 4 long days a week) to gain experience but is there a "proper" way to become a domestic installer? I.e college course?

Thanks
 
I never understand the amount of people who come on this forum and want to retrain but aren't willing to put the time and effort into going down the proper college route or take a drop in wages! You might be at the top of your game in your job now but as far as I'm concerned if you were working on proper sites you would be cleaning the s*** of the lads shoes to begin with!
 
I never understand the amount of people who come on this forum and want to retrain but aren't willing to put the time and effort into going down the proper college route or take a drop in wages! You might be at the top of your game in your job now but as far as I'm concerned if you were working on proper sites you would be cleaning the s*** of the lads shoes to begin with!

College places are limited.
I got the last place when I did my 2391, so got lucky there. Might not have done it otherwise.
Plus, I'd never fall for the promises Tony just pointed out, nor pay their fees.
 
Remember its no difference to anything they do ie they all want the lazy way out ie want to lose weight than dont cut your portions and excercise take this tablet and lose a stone in a week and because of this there is no self discapline
 
Last edited by a moderator:
no-one wants to start on the bottom rung these days, all we hear are silly excuses to change career paths later on and they expect the big ÂŁÂŁÂŁ straight away so they compromise on quality/workmanship by doing these absolutely ridiculous "domestic installers" courses, it makes me sick to my stomach reading constant posts on this site similar to the OP

nothing is easy, apprenticeships were hard to come by when i got mine, I rang every company in the phonebook and I don't mean that as a figure of speech I LITERALLY rang every local company, I had various interviews rejections the first time around, so when I missed my chance that year I did a pre apprenticship full time course in college then rang every company again,

I finally got one of 2 positions available out of 1200 applicants, you've got to want it people and not take the easy route,

Now I'm qualified, done my 17th updates my inspection and testing and am recognised by my colleagues engineers as a useful competant electrician who can do domestic work, commercial work and industrial work and can be thrown into jobs in all fields.

as a DI you will only be doing domestic work and the industry is flooded with them so these false promises of earning "50K in 5 weeks!!!" are indeed false promises, you will have trouble looking for work and that is a promise, if you really want to be a spark to it properly or not at all!!!!
 
I did various courses passed them all but then found course didn't even teach the basics was left with huge gaps in knowledge etc. my advice is any course is just a course you also need time and experience. Know your limitations and if you don't know what's involved find out before you start or don't take the job on. Hope this helps for what it's worth. 2382 as I recall open book multi choice easy if you know "the method".regards
 
I never understand the amount of people who come on this forum and want to retrain but aren't willing to put the time and effort into going down the proper college route or take a drop in wages! You might be at the top of your game in your job now but as far as I'm concerned if you were working on proper sites you would be cleaning the s*** of the lads shoes to begin with!

I didn't once say I didn't want to put the time and effort in, in fact I'm very driven and determined. I just wanted a steer from the people who have been these courses and as I said I want to learn as a back up should something bad happen in my current career.

Maybe people shouldn't tarnish every newbie with the same brush!
 
I worked weekends for nothing for about 12 mths to get experiance while working 40 hrs and going to college 2 nights a week for 2 yrs to get the old and i think best c&g 2360 part 1&2 . Then 6 yrs working for low wages as a mate did the 2381 & then 2382 and final when i thought i was ready 2391 . Been self employed now for 18 mth reg with Elecsa and finding it really hard to get work. Have seen some horrors that have been completed by some part p reg sparks so i am a bit against the fast track route . I wont say what i made last year but i can tell you it wast even close to half the 50k . Its bloody hard out there think hard and long.
 

Reply to Is there a "proper" way to become a domestic installer? in the Domestic Electrician Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
715
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

  • Question
You’ll need level 3 qualifications- 2391 or equivalent plus 18th edition to get on an PV course. To join a scheme and sign work off, I think...
Replies
1
Views
553
  • Question
What attracts me is, i enjoy working in trade i like keeping busy an grafting an getting to be proud when a job is finished, with the electrician...
Replies
3
Views
502

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top