Is this safe? | on ElectriciansForums

Discuss Is this safe? in the The Welcome Forum area at ElectriciansForums.net

P

Philip

I am renting a property where all of the bathroom lights suddenly stopped working. I understand the transformer was at adult which was above the ceiling. The landlord has taken 2.5 weeks to get to this point, during which time I have not used the bathroom as the spotlights were hanging down from the ceiling and all the wiring exposed. The latest work shows numerous holes in the ceiling; the one I am especially concerned about is the one pictured, above the shower head. I assume this is still unsafe and the bathroom should not be used?

many thanks in advance for, what I hope will be some very helpful answers.
 

Attachments

  • image.jpg
    170.1 KB · Views: 126
With the position of that light and the chase in the boards I question the fittings integrity, It could have an open hole in it but please do not go poking around in it.
Put your rough location, we'll probably have a member near you who could come to see this and advise you better
 
The fan looks like it's falling out and I'm lost for words about the ceiling. Did the contractor leave it like that? Is he coming back to finish it maybe? I probably wouldn't use that shower as it is at the moment.

**edit** I didn't understand the 'adult' thing either but I'm assuming the spellchecker or autocorrect made up its own word.
 
With the position of that light and the chase in the boards I question the fittings integrity, It could have an open hole in it but please do not go poking around in it.
Put your rough location, we'll probably have a member near you who could come to see this and advise you better

Where do you think Norwich is then Trev?
 
Apologies, I wrote the original post rather quickly. At adult is indeed meant to say at fault!

Rest assured, I have no intention of poking around in any of the holes as I am certainly not an electrician. This is how the bathroom was left with, what I assume, is for someone to come round and patch up the holes.

Reading around the subject of lights in bathrooms, the light fittings are in zone 2 (0.6 metres above the shower cubicle). I assume, therefore, that the ceiling and wires must be adequately protected from splashes that may arise around that area.

In short, my assumption is, is that the bathroom should not be used as it is potentially dangerous.

I am very appreciative for all of your responses.
 
Where do you think Norwich is then Trev?

He KNOWS it's south of the Tyne and that's all he needs to know!!

South of the Tyne are lands populated by the Mackem, Smoggie, Manc, Scouse, Tyke Cockney and various other tribes of inbred mutants which because of his delicate nature his Ma & I have kept from him.:laugh:
 
Apologies, I wrote the original post rather quickly. At adult is indeed meant to say at fault!

Rest assured, I have no intention of poking around in any of the holes as I am certainly not an electrician. This is how the bathroom was left with, what I assume, is for someone to come round and patch up the holes.

Reading around the subject of lights in bathrooms, the light fittings are in zone 2 (0.6 metres above the shower cubicle). I assume, therefore, that the ceiling and wires must be adequately protected from splashes that may arise around that area.

In short, my assumption is, is that the bathroom should not be used as it is potentially dangerous.

I am very appreciative for all of your responses.

The description of zone 2, as far as ceiling lights are concerned, are not measured from the shower cubicle but from the shower basin. If the ceiling is 2.25m above the basin, the lights are considered outside the zones. Not saying its safe as it is, just not zone 2
 
The description of zone 2, as far as ceiling lights are concerned, are not measured from the shower cubicle but from the shower basin. If the ceiling is 2.25m above the basin, the lights are considered outside the zones. Not saying its safe as it is, just not zone 2

2.25m is actually measured from finished floor level as daft as it is, but equipment and wiring systems must also be suitable for external influences present regardless of zones.
 

Reply to Is this safe? in the The Welcome Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
305
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
823
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
906

Similar threads

SOLVED Thanks for all the help. It was nothing to do with the smoke detector. In this new hole (where there will be a light fitting) three white...
    • Like
2
Replies
24
Views
3K
Thank you for your response. I really appreciate it.
Replies
13
Views
742

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top