Isolation lock off device

[diditrain]

Can anyone recommend an lock off device that works well on an 60947-3 main switch.
Most of them that I have seen come as a kit with lots of tatt thrown in that I do not need such as the padlocks, labels and cable ties etc, and are seriously overpriced?

 

[Deleted member 26818]

You can get little G clamp type.
Clamps on to the toggle bit and you tighten them either with a knurled knob or an Allen key through a hole.
Then you padlock them.
Circuit Breaker Lockouts | Lockout-Lock.com - https://www.lockout-lock.com/mcb-circuit-breaker/circuit-breaker-lockouts

 

[diditrain]

Yeah , there are plenty available on there. I have tried some like they have on there, but they have never felt quite right/secure.

 

[Deleted member 26818]

You can get the type with the bent bit of wire, but then you need two sizes, one size for MCB/RCBOs and another for Main switches.
Some of the G clamp type have a pointed grub screw that digs into the toggle.
I don’t like them because they damage the toggle.

 

[diditrain]

Yeah, I have experienced that. I think some people have filed the point down, from what I have read online.

 

[SparkyChick]

I've got one of these:-

KEWLOK Lock Out Device | Kewtech - https://www.kewtechcorp.com/products/leads-and-accessories/kewlok

Seems to work quite nicely whenever I use it.

 

[Deleted member 26818]

I've got one of these:-

KEWLOK Lock Out Device | Kewtech - https://www.kewtechcorp.com/products/leads-and-accessories/kewlok

Seems to work quite nicely whenever I use it.

I think that’s similar to the one I was thinking of, except the knurled knob is red instead of black.

 

[The Ghost]

Until (as I have) you forget the number

 

[Andy78]

I've got one of these:-

KEWLOK Lock Out Device | Kewtech - https://www.kewtechcorp.com/products/leads-and-accessories/kewlok

Seems to work quite nicely whenever I use it.

Those look good I might have to grab a few.

I used to use the screw type like these.
Miniature Circuit Breaker (MCB) Lockout w/ Adjustable Screw - https://www.lockout-lock.com/adjustable-mcb-lockout

But the top hinged CUs I use for domestic work mean that I can't get a screwdriver to the grub screw

 

[Wilko]

Until (as I have) you forget the number

Ha ha, try my combination, it's 1,2,3 (now don't tell anyone !)

 

[telectrix]

mine and pete's are I,IV,and IX.