littlespark

-
Staff member
Esteemed
Arms
Supporter
Patron
What’s a good brand of kinetic type switches?

Do they come IP rated, as existing switches and sockets are Masterseal type.

Where to get them? Regular wholesalers, screwfix, Amazon?

Long shed, 34m x 6m. 3 double doors along long wall, existing 2 gang 2 way at each end door controlling 6 twin fluorescents, 3 in each half on each 2 way circuit.
New plan is to use the middle door more often, as it’s been widened, and a smaller door on the opposite wall, central, that goes through a kitchen room to outside door. This entry will also be used more often.

I could rewire to add intermediates, but looks easier to just add receivers and kinetic switches at all doors.
 
Quinetic are the dog's bollox. IP rated, but don't know exact rating. make sure receivers are OK with florries. ( but you should have already changed these for LED. :p .).
 
should be fine with fluorescents..... It's just a switch.... As long as receiver uses a neutral...
Not like a no-neutral smart switch that needs a filament lamp to work.
 
Fitted my first Wuinetic switch yesterday , imo they will change the way I would rewire a house now ...

absolute simplicity at it’s best
 
I agree with Tel on this. TLC are your place to shop, and they have all the specs on the range. Some new stuff added very recently too.
 
Ill get a 2 output receiver and 3 x 2 gang switches. One door cant be opened from outside so wont need a switch.
 
Quinetic switches are 100% the future trying to use them everywhere i can now proper game changer
IMG_3173.JPG
IMG_3414.JPG
 
I've been using the Quinetic wireless switches for years and years they are superb. Had some off eBay that came from here that were equally as good!
 

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

littlespark

Staff member
Esteemed
Arms
Supporter
Patron
-
Joined
Location
Scottish Borders
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Practising Electrician (Qualified - Domestic or Commercial etc)

Thread Information

Title
Kinetic switches. Good makes?
Prefix
N/A
Forum
Electrical Tools and Products
Start date
Last reply date
Replies
8

Advert

Thread statistics

Created
littlespark,
Last reply from
SparkySy,
Replies
8
Views
10,576

Advert

Back
Top