Kitchen downlighters - what certificate? | on ElectriciansForums

Discuss Kitchen downlighters - what certificate? in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

R

rocker

Evenin' all, I'm putting some SELV fire rated downlighters in a kitchen. The ceiling is above 2.25m, so it's out of zones. Currently there is one pendant in the middle of the room.

Can I write a minor certificate for this? It's on existing circuit and out of zones, don't really see the point of writing an installation cert, but is there anything I'm not thinking about regarding the kitchen? Cheers.
 
IEE Electrician's guide to the building regulations PART P

"A kitchen is particularly identified in Aproved Document as being a location where:
- adding a lighting point, light fiting and switches to existing circuit
- adding socket-outlets and fused spurs
is required to be notified to building cobtrol "
 
Yea but a kitchen as defined by the regs is an area with a sink and food preperation areas, and within the zones i.e. anything above 2.25m is no longer a kitchen as far as the regs are concerned. So technically I'm just extending (or even just modifying) a circuit in a normal location. As far as I can see, that isn't notifiable.

Don't know why I'm bothered really, an installation cert isn't that much more work but turning off all the power for the house to get a Ze reading for the sake of a few downlighters seems excessively disruptive.

Ezekiel have kitchen been declassified to a normal location??? When did this happen?
 
OK This is what I would do....Minor works certificate and notify LABC

My understanding of kitchens being special locations is that IEE no longer see it as a special location HOWEVER LABC do!
 
Last edited:
Hmm well I aint going to do a minor and then pay Control their fee, I may as well do an installation cert through Elecsa, innit.
 
Thats what I do.......

Minor works cert and notify via the web.

You have stuck a couple of lights on not installed a circuit.
 
Last edited:
I dont understand your point, why would you want to do an EIC for what may be the whole house lighting circuit when youve just stuck another light on?

I certainly wont issue EIC for someone elses work, its a mine field.

You have carried out a minor works, issue the correct certificate and inform LABC via the web.

Elecsa do not need to see the certificate and at your annual inspect may look at one or two but whats the problem as long as you do it right?

If your saying you must certify others work to inform LABC then I have been doing it wrong for ages, downlighter above a shower done yesterday.....minor works and notify.

I hope I am not wrong as what a pain up the bottom it will be if you have to do EIC for a poxy light!
 
No that's cool it makes sense to me, apart from the informing part - if we are filling in a minor works cert, then by definition the work is non-notifiable, so why are we informing LABC?

How do you inform online? It strikes me that my council do not let you inform without a planning form with which comes a charge - theres no way I'm paying ÂŁ110 on every minor job I do.
 
The 2.25m 'out of zone ' you are referring to is for bath/shower rooms,there are no zones for kitchens.
It comes under part P so minor works and notify BC is required....normally as a registered contractor you notify BC through your scheme provider online for a fee of a pound or two.If you are not registered you should notify before starting work and cough up the fee. There is no need to notify if the work is a like for like replacement of an existing light.
 
Last edited by a moderator:
wirepuller
agree, and by the way any extra low voltage fittings except preassembled are special installation - notifiable even if is in bedroom
 
Last edited by a moderator:

Reply to Kitchen downlighters - what certificate? in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
271
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
770
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
776

Similar threads

Problems can arise when you get on too well then they think he won’t mind me doing a bit.
    • Friendly
    • Like
Replies
8
Views
435
I usually put something like this To assess compliance with BS7671 for continued safe operation (5 year periodical inspection)
Replies
8
Views
440

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top