Lets see how good this forum is ?

[Desmond.22]

Apologies for headline trying grab attention

So can someone help on this scenario.

Plant room prob 7Mx7M square ish. Loads of HVAC, pumps etc as you would expect and a ring final circuit.

Socket been damaged somehow and went to replace socket.

After replacing socket just for peace of mind we test that circuit. IR ok elip ok polarity etc.

Test RCBO and with cables disconnected as per GN3 all ok.

Just testing further and left loop tester on high current and the RCBO did not trip unusual so we got out RCD tester and couldn't get the RCBO to trip from socket. Yet with cables disconnected works as should.

So what going on and ae replaced RCBO and same ?

But circuit looks ok all in tact all tests on circuit as expected.

So unplug everything thinking maybe some item plugged in causeing problem but NO joy still.

Anyone ?

 

[Dan]

So in the end, was the forum good?

 

[Desmond.22]

So in the end, was the forum good?

Yeah never helped me find fault specifically but good all the same.

Ppl ask about loads connected so good call by them

Yeah impressed

 

[Dan]

Yeah never helped me find fault specifically but good all the same.

Ppl ask about loads connected so good call by them

Yeah impressed

That's what we like to hear.

I'm not a sparky so reading threads on here just baffles me. Sounds like one of those situations where somebody needs to be there to look.

 

[Gary Gemmell]

You tried turning it off and on again?

(Sorry I'm not a sparky )

Top comment made me laugh!
I only come for the comments!

;o)

[automerge]1576420217[/automerge]

That's what we like to hear.

I'm not a sparky so reading threads on here just baffles me. Sounds like one of those situations where somebody needs to be there to look.

Its all these acrnyms that get me its actually worse than being in IT.
lol

RCBO, FE, FRC???