Light switch wiring question | on ElectriciansForums

Discuss Light switch wiring question in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 3, 2019
Messages
1
Reaction score
0
Location
Sunderland
Hi. In regards to a 1way light switch that has a loop installed at the switch can I simply install a new switch and put the loop wires in l2 and the switch in l1?

[ElectriciansForums.net] Light switch wiring question
 
Hi. In regards to a 1way light switch that has a loop installed at the switch can I simply install a new switch and put the loop wires in l2 and the switch in l1?
If you do that, it will not work, ever.

Where do the 'loop' wires terminate at the moment?
What colour are these 'loop' wires?
 
Some switches have a terminal marked ‘loop’ which is where the neutrals are connected to. This terminal has no function for the switch and is simply somewhere to park the neutral wires.

If your new switch doesn’t have this, use a bit of connector for the neutrals.

A photograph of the existing switch connections and all the cables at the switch would help us give you more accurate advice.
 
What you have there, is a 2 way switch.
Depending upon the switch position, you will have continuity between either L and L1 or L and L2.
If you were to put the permanent live into L and the neutrals into L2, whenever you switched off, your fuse or MCB would blow or trip. All your lights would go off.
You could feasibly put the permanent live into L1 and the neutrals into L2.
I would not recommend doing such though.
 
Some people write replies without thinking of the consequences of what they are writing, this is part of being an electrician is you understand how all the component parts work, I read a post the other day, “on how do you do a rewire” crazy that we even reply to these people especially the general public.
 
Further to the comments “what you have there is a 2 way switch” all one gang switches that are enhanced, chrome, satin, etc are nearly always 1 gang 2 way, find out the facts first then you can give advice that fits the situations
 
Further to the comments “what you have there is a 2 way switch” all one gang switches that are enhanced, chrome, satin, etc are nearly always 1 gang 2 way, find out the facts first then you can give advice that fits the situations

It is a fact that the picture showed a 2 way switch. Not sure what you are getting at here?
 

Reply to Light switch wiring question in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

Thank you so much for your help with this light work perfect now thank you again much appreciated
Replies
2
Views
292
Thanks again for your help, now solved 👍
Replies
11
Views
569

Recommended Sponsor News

  • Article
thanks for the clarification. ( also thanks to Dan. ).
Replies
6
Views
2K
  • Article
More info on link below http://sbsc.uk.net/
    • Like
2
Replies
22
Views
9K
  • Article
Happy Friday Everyone! Subscribe for more jokes direct to your mailbox or send us your own jokes to be in with a chance of featuring, by clicking...
    • Like
2
Replies
27
Views
6K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top