Light wiring help required

[RockyS]

Hi
I’m in the process of swapping over a fluorescent light to an LED light in my fathers garage,and stupidly forgot to take a photo of the wiring before I disconnected the original light?.
I’m wiring it in through a connector block as he wants the option of maybe adding another one at a later date. My question is could somebody please help me regarding connecting the wires?
I’ve attached some photos which I hope will help
Which coloured wires need to be connected together? I should add it’s a one way switch in the garage. A big thanks in anticipation
Craig

 

[westward10]

The blue with the brown sleeve is live, blue is neutral the green/yellow are earths. What do you mean connecting by connector block.

 

[telectrix]

what he said^^^^^. and the 2 browns stay as they are, not connected to the light itself. make sure the earths are connected together. (probably a terminal marked E in the light for these).

 

[ipf]

Is that 32amp rated joint box your connection block?
and...Will you have access to it on completion?

 

[telectrix]

Is that 32amp rated joint box your connection block?
and...Will you have access to it on completion?

needs replacing with a smaller one. or even better a quickwire . it's accessible surface mountedon the timber.

 

[ipf]

Cables entering the luminaire with connections internal would be the way, though.

 

[freddo]

There is a floor board crushing one of the cables, WTF?! The surface clipping needs tidying up too.

 

[DPG]

There is a floor board crushing one of the cables, WTF?! The surface clipping needs tidying up too.

Never noticed the trapped cable!

 

[telectrix]

The surface clipping needs tidying up too.

agreed . the clip nails should be below the lower cable and above the upper cable. they'e cables, not railway tracks.

 

[cloverman]

Looks to me like they have done a cut out for the cable to run through !