O
One_of_them
guys,
small(ish) office fed with 2 rings mains, one either side of room ran in dado. The last socket in each dado run are within touching distance of each other and the rings are on different phases
So line-line is in excess of 415V and should somebody decide they want to start licking sockets....well..anyway
Is there anything relevant for this? Only possible thing I can find in both Big Red and online is 514.10 which relates to Warning Notice: Voltage however this aint exactly specific?
TBH i could always move the RCBO to the same phase in the board as there is spares but if it aint a problem then i'll not bother wasting anytime on it.
any help?
small(ish) office fed with 2 rings mains, one either side of room ran in dado. The last socket in each dado run are within touching distance of each other and the rings are on different phases
So line-line is in excess of 415V and should somebody decide they want to start licking sockets....well..anyway
Is there anything relevant for this? Only possible thing I can find in both Big Red and online is 514.10 which relates to Warning Notice: Voltage however this aint exactly specific?
TBH i could always move the RCBO to the same phase in the board as there is spares but if it aint a problem then i'll not bother wasting anytime on it.
any help?
Last edited by a moderator:
